2007-2013 Highlander Kluger · Service Manual BODY

INSTALLATION

Removal / installation · Vehicles built May 2007 – Jul 2008

Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010 from Jul 2010


1. INSTALL GLASS HATCH OPENER SWITCH ASSEMBLY

  1. B173458
    Install the glass hatch opener switch assembly.

  1. B173459
    Engage the guide and install the bracket.

  1. Install the screw.

  1. B173460
    Engage the 2 claws.


2. INSTALL BACK DOOR OUTSIDE GARNISH ASSEMBLY
  1. Install 2 new clips and 5 new gaskets on the back door outside garnish assembly.

  1. B174405
    Engage the 2 clips and install the back door outside garnish assembly.

  1. B174406
    Install the 5 nuts.

  1. Connect each connector.


3. INSTALL BACK DOOR TRIM PANEL ASSEMBLY

  1. B174211
    Engage the 16 clips and install the back door trim panel assembly.


4. INSTALL ASSIST STRAP ASSEMBLY

  1. B177264
    Install the assist strap assembly with the bolt.


5. INSTALL ASSIST STRAP HOLE COVER

  1. B177265
    Engage the 2 guides and 2 claws, and install the assist strap hole cover.


6. INSTALL BACK DOOR LOCK COVER

  1. B173203
    Engage the 4 guides and 2 claws, and install the back door lock cover.


7. INSTALL BACK DOOR TRIM COVER LH (w/o Power Back Door)

  1. B173199
    Engage the 2 clips and 2 claws, and install the back door trim cover LH.


8. INSTALL BACK DOOR TRIM COVER LH (w/ Power Back Door)

  1. B173202
    Engage the 2 clips and 2 claws, and install the back door trim cover LH.


9. CONNECT POWER BACK DOOR ROD (w/ Power Back Door)

  1. B173201
    Install the back door stay plate and connect the power back door rod.

    Torque:
    18 N*m{ 184 kgf*cm , 13 ft.*lbf }


10. INSTALL BACK DOOR SERVICE HOLE COVER LH (w/ Power Back Door)

  1. B173200
    Engage the 6 claws and install the back door service hole cover LH.


11. INSTALL BACK DOOR TRIM COVER RH

  1. B174214
    Engage the 2 clips and 2 claws, and install the back door trim cover RH.


12. INSTALL BACK WINDOW UPPER TRIM PANEL ASSEMBLY

  1. B173198
    Engage the 4 clips and 4 claws, and install the back window upper trim panel assembly.


13. PARKING ASSIST MONITORING SYSTEM
(Click here)
← INSPECTION (from May 2007)INSTALLATION (Aug 2008 – Jun 2010) →