2007-2013 Highlander Kluger · Service Manual BODY

DISASSEMBLY

Removal / installation · Vehicles built from May 2007


1. REMOVE REAR SEAT RECLINING UPPER COVER

  1. B173783E01
    Using a screwdriver wrapped with protective tape, disengage the 3 claws and remove the rear seat reclining upper cover.


2. REMOVE NO. 1 RECLINING ADJUSTER RELEASE HANDLE

  1. B196364
    Remove the 3 screws and the No. 1 reclining adjuster release handle.


3. REMOVE REAR SEAT CUSHION MOULDING LH

  1. B196365
    Remove the screw.

  1. Disengage the 5 claws.

  1. Disengage the guide and remove the rear seat cushion moulding LH.


4. REMOVE SEAT ADJUSTER COVER CAP

  1. B173786E01
    Using a screwdriver wrapped with protective tape, disengage the 2 claws and remove the seat adjuster cover cap.


5. REMOVE REAR SEAT CUSHION MOULDING RH

  1. B173788
    Remove the screw.

  1. Disengage the 6 claws and remove the rear seat cushion moulding RH.


6. REMOVE SEAT ADJUSTER COVER CAP

  1. B196371E01
    Using a screwdriver wrapped with protective tape, disengage the 2 claws and remove the seat adjuster cover cap.


7. REMOVE SEAT ADJUSTER COVER CAP

  1. B196367E01
    Using a screwdriver wrapped with protective tape, disengage the 2 claws and remove the seat adjuster cover cap.


8. REMOVE CENTER PROTECTOR COVER

  1. B196369
    Remove the screw.

  1. Disengage the claw and guide.

  1. B196370
    Remove the screw and disconnect the rear side seat band sub-assembly.

  1. Remove the center protector cover.


9. REMOVE REAR SEAT NO. 2 LEG SIDE COVER

  1. B206100
    Disengage the 2 claws and remove the rear seat No. 2 leg side cover.


10. REMOVE NO. 2 SEAT LEG COVER

  1. B196373
    Remove the 5 screws and the No. 2 seat leg cover.


11. REMOVE REAR SIDE SEAT BAND SUB-ASSEMBLY

  1. B196374
    Remove the rear side seat band sub-assembly.


12. REMOVE REAR SEAT 3 POINT TYPE COVER ASSEMBLY

  1. B196375
    Disengage the 2 claws and remove the rear seat 3 point type cover assembly.


13. REMOVE REAR SEAT CUSHION UNDER COVER

  1. B173790E01
    Using a screwdriver wrapped with protective tape, disengage the claw.

  1. Disengage the guide and remove the rear seat cushion under cover.


14. REMOVE NO. 2 REAR SEAT BEZEL COVER

  1. B173792
    Remove the screw.

  1. Disengage the 2 guides and remove the No. 2 rear seat bezel cover as shown in the illustration.


15. REMOVE REAR SEAT LOCK ASSEMBLY

  1. B196377
    Remove the 2 bolts and the rear seat lock assembly.


16. REMOVE REAR SEAT FRONT CUSHION MOULDING

  1. B196378
    Remove the screw and the rear seat front cushion moulding.


17. REMOVE REAR NO. 1 SEAT CUSHION COVER WITH PAD

  1. B180396
    Disengage the 2 hooks.

  1. B173795
    Disengage the 2 hooks.

  1. Remove the 2 hog rings.

  1. B196379
    Disengage the 3 buttons.

  1. B206101
    Disengage the 12 hooks.

  1. B173797
    Remove the 3 hog rings and the rear No. 1 seat cushion cover with pad.


18. REMOVE SEPARATE TYPE REAR NO. 1 SEAT CUSHION COVER

  1. B173798
    Remove the 11 hog rings and the separate type rear No. 1 seat cushion cover.


19. REMOVE NO. 1 REAR SEAT COVER (for LH Side)

  1. B206102
    Disengage the 4 hooks and remove the No. 1 rear seat cover.


20. REMOVE NO. 1 REAR SEAT COVER (for RH Side)

  1. B206103
    Disengage the 2 hooks and remove the No. 1 rear seat cover.


21. REMOVE NO. 1 REAR SEAT COVER (for Rear Side)

  1. B196382
    Disengage the 2 hooks and remove the No. 1 rear seat cover.


22. REMOVE REAR SEAT NO. 1 RECLINING COVER

  1. B206149
    Remove the screw.

  1. Disengage the claw.

  1. Disengage the 2 guides and remove the rear seat No. 1 reclining cover.


23. REMOVE RECLINING ADJUSTER INSIDE COVER LH

  1. B206150
    Disengage the guide and remove the reclining adjuster inside cover LH.


24. REMOVE SEAT TRACK UPPER RAIL COVER

  1. B206104
    Remove the screw.

  1. Disengage the claw and remove the seat track upper rail cover.


25. REMOVE REAR SEAT RECLINING INNER COVER

  1. B206105
    Remove the screw.

  1. Disengage the guide and remove the rear seat reclining inner cover.


26. REMOVE REAR NO. 1 SEAT INNER BELT ASSEMBLY

  1. B170974
    Remove the bolt and the rear No. 1 seat inner belt assembly.


27. REMOVE NO. 1 SEAT ARMREST CAP

  1. B173800E01
    Using a screwdriver wrapped with protective tape, disengage the 2 claws and remove the No. 1 seat armrest cap.


28. REMOVE REAR SEAT ARMREST ASSEMBLY

  1. B173802
    Remove the bolt and the rear seat armrest assembly.


29. REMOVE TONNEAU COVER HOOK HOLDER

  1. B196386
    Remove the 2 screws and the 2 tonneau cover hook holders.


30. REMOVE REAR SEATBACK COVER

  1. B173805
    Disengage the 4 claws and remove the rear seatback cover.


31. REMOVE REAR SEAT LOCK STRIKER COVER

  1. B206106
    Using a screwdriver wrapped with protective tape, disengage the claw.

  1. Disengage the guide and remove the rear seat lock striker cover.


32. REMOVE REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY

  1. B206107
    Remove the 2 screws.

  1. Disengage the guide.

  1. Disconnect the rear seat lock control cable and remove the rear seat lock control lever sub-assembly as shown in the illustration.

    B173808


33. DISCONNECT REAR CENTER SEAT OUTER BELT ASSEMBLY

  1. B170903
    Remove the bolt and disconnect the rear center seat outer belt assembly.


34. REMOVE REAR SEATBACK LOWER LOCK BEZEL

  1. B196390
    Remove the screw.

  1. Disengage the 4 claws and disconnect the rear center seat outer belt cover.

  1. B196391
    Disengage the snap and remove the rear seat track handle as shown in the illustration.

  1. B196393
    Remove the 2 screws and the rear seatback lower lock bezel.


35. REMOVE REAR SEATBACK LOCK ASSEMBLY

  1. B206108
    Remove the 2 bolts and the rear seatback lock assembly.


36. REMOVE REAR SEATBACK BOARD CARPET ASSEMBLY

  1. B206109
    Disengage the 19 claws as shown in the illustration.

  1. Disengage the 2 clips.

  1. Disengage the 2 guides and remove the rear seatback board carpet assembly.


37. REMOVE REAR NO. 1 SEAT HEADREST SUPPORT ASSEMBLY LH

  1. B196396
    Disengage the 2 claws and remove the rear No. 1 seat headrest support assembly LH.


38. REMOVE REAR NO. 1 SEAT HEADREST SUPPORT ASSEMBLY RH

  1. B196397
    Disengage the 2 claws and remove the rear No. 1 seat headrest support assembly RH.


39. REMOVE REAR NO. 1 SEATBACK COVER WITH PAD

  1. B173823
    Disengage the 2 hooks and the remove rear No. 1 seatback cover with pad.


40. REMOVE SEPARATE TYPE REAR NO. 1 SEATBACK COVER

  1. B173826
    Remove the 10 hog rings and the separate type rear No. 1 seatback cover.


41. REMOVE BELT SUPPORT PLATE

  1. B170939
    Disengage the 3 claws and remove the belt support plate.


42. REMOVE REAR CENTER SEAT OUTER BELT ASSEMBLY

  1. B170904
    Remove the bolt, nut, and the rear center seat outer belt assembly.


43. REMOVE REAR NO. 1 SEAT SHOULDER BELT COVER

  1. B196398
    Disengage the claw.

  1. Disengage the guide and remove the rear No. 1 seat shoulder belt cover.


44. REMOVE REAR NO. 2 SEATBACK COVER

  1. B173828
    Remove the 2 screws.

  1. Disengage the claw and remove the rear No. 2 seatback cover.


45. REMOVE REAR SEAT CUSHION SIDE COVER

  1. B173829
    Remove the 2 screws.

  1. Disengage the claw and remove the rear seat cushion side cover.


46. REMOVE NO. 2 REAR SEAT COVER

  1. B206110
    Remove the No. 2 rear seat cover.


47. REMOVE NO. 1 REAR SEAT RECLINING CONTROL CABLE

  1. B206111
    Disengage the 6 control cable clamps and 2 clamps.

  1. Remove the clamp and the No. 1 rear seat reclining control cable.


48. REMOVE NO. 2 REAR SEAT RECLINING CONTROL CABLE

  1. B206112
    Disengage the 4 cable camps and rear seat hook.

  1. Disengage the rear seat hook.

  1. Disengage the claw and remove the No. 2 rear seat reclining control cable.


49. REMOVE REAR SEAT HOOK

  1. B196402
    Disengage the claw and remove the rear seat hook from the No. 2 rear seat reclining control cable.


50. REMOVE REAR SEAT CUSHION SPRING ASSEMBLY

  1. B206113
    Using a T45 "TORX" socket, remove the 4 "TORX" bolts, 2 bushes and the rear seat cushion spring assembly.

← REMOVAL (from May 2007)REASSEMBLY (from May 2007) →