DISASSEMBLY
Removal / installation · Vehicles built May 2007 – Jun 2010
Versions by build date: May 2007 – Jun 2010 from Jul 2010
| 1.
REMOVE RECLINING COVER PROTECTOR LH |
 |
- Remove the 2 screws and the reclining cover protector LH.
| 2.
REMOVE NO. 2 SEAT HINGE COVER LH |
 |
- Remove the 2 screws and the No. 2 seat hinge cover LH.
| 3.
REMOVE RECLINING COVER PROTECTOR RH |
 |
- Remove the 2 screws and the reclining cover protector RH.
| 4.
REMOVE NO. 2 SEAT HINGE COVER RH |
 |
- Remove the 2 screws and the No. 2 seat hinge cover RH.
| 5.
REMOVE REAR NO. 2 SEAT CUSHION COVER WITH PAD |
 |
Disengage the 13 hooks.


Remove the 4 hog rings and the rear No. 2 seat cushion cover with pad.


| 6.
REMOVE REAR NO. 2 SEAT CUSHION COVER SUB-ASSEMBLY |
 |
Remove the 14 hog rings and the rear No. 2 seat cushion cover sub-assembly.


| 7.
REMOVE NO. 1 REAR SIDE SEAT BAND SUB-ASSEMBLY |
 |
- Remove the 2 clips.
Separate the fastener and the rear side seat band sub-assembly.
| 8.
REMOVE REAR SEAT LOCK STRIKER COVER |
 |
- Using a screwdriver wrapped with protective tape, disengage the claw.
Disengage the 2 guides and remove the rear seat lock striker cover.
| 9.
REMOVE REAR NO. 2 SEAT HANDLE |
 |
- Remove the 2 screws.
- Remove the clamp.
Disconnect the 2 cable clamps and remove the rear No. 2 seat handle as shown in the illustration.


| 10.
REMOVE NO. 2 SEATBACK BOARD SUB-ASSEMBLY |
 |
Disengage the 7 clips.


Disengage the 3 hooks and remove the No. 2 seatback board sub-assembly.
| 11.
REMOVE NO. 1 REAR SEAT COVER BEZEL |
 |
- Remove the 2 screws.
Separate the hook and the No. 1 rear side seat band sub-assembly with No. 1 rear seat cover bezel.
- Remove the No. 1 rear seat cover bezel.
| 12.
REMOVE REAR NO. 2 SEATBACK COVER WITH PAD |
 |
Remove the 4 hog rings.


Disengage the 15 hooks.
- Disengage the 16 clips and remove the rear No. 2 seatback cover with pad.
| 13.
REMOVE REAR NO. 2 SEATBACK COVER SUB-ASSEMBLY |
 |
Remove the 18 hog rings and the rear No. 2 seatback cover sub-assembly.


| 14.
REMOVE NO. 2 REAR SEAT RECLINING COVER LH |
 |
- Remove the screw.
Disengage the guide and remove the No. 2 rear seat reclining cover LH.
| 15.
REMOVE NO. 2 REAR SEAT RECLINING COVER RH |
 |
- Remove the screw.
Disengage the guide and remove the No. 2 rear seat reclining cover RH.
| 16.
REMOVE REAR NO. 2 SEAT HEADREST ASSEMBLY LH |
 |
- Remove the 2 screws and the rear No. 2 seat headrest cover LH.
- Disconnect the 2 cable clamps.
Remove the 3 nuts and the rear No. 2 seat headrest assembly LH.
| 17.
REMOVE REAR NO. 2 SEAT HEADREST ASSEMBLY RH |
 |
- Remove the 2 screws and the rear No. 2 seat headrest cover RH.
- Disconnect the 2 cable clamps.
Remove the 3 nuts and the rear No. 2 seat headrest assembly RH.
| 18.
REMOVE REAR SEATBACK EDGE PROTECTOR |
 |
- Disengage the 8 claws and remove the 4 rear seatback edge protectors.
| 19.
REMOVE NO. 2 REAR SEAT CUSHION LOCK CABLE ASSEMBLY LH |
 |
- Remove the clamp.
Disconnect the 2 cable clamps and remove the No. 2 rear seat cushion lock cable assembly LH.
| 20.
REMOVE NO. 1 REAR SEAT LOCK CABLE ASSEMBLY LH |
 |
- Disconnect the 2 cable clamps and remove the No. 1 rear seat lock cable assembly LH.
| 21.
REMOVE NO. 2 REAR SEAT CUSHION LOCK CABLE ASSEMBLY RH |
 |
- Remove the clamp.
Disconnect the 2 cable clamps and remove the No. 2 rear seat cushion lock cable assembly RH.
| 22.
REMOVE NO. 1 REAR SEAT LOCK CABLE ASSEMBLY RH |
 |
- Disconnect the 2 cable clamps and remove the No. 1 rear seat lock cable assembly RH.
| 23.
REMOVE NO. 2 SEAT CUSHION FRAME SUB-ASSEMBLY |
 |
- Remove the 2 nuts, 2 bolts<A>, 2 spiral springs and the 2 E-rings.
Remove the 2 bolts <B> and the 2 bushes.
Remove the 2 bolts <C>, 2 washers and the No. 2 seat cushion frame sub-assembly.