DISASSEMBLY
Removal / installation · Vehicles built from Jul 2010
Versions by build date: May 2007 – Jun 2010 from Jul 2010
| 1.
REMOVE REAR NO. 2 SEAT INNER BELT SUB-ASSEMBLY RH |
 |
Remove the rear No. 2 seat inner belt sub-assembly RH (Click here).
- HINT:
- Use the same procedure for the RH side and LH side.
| 2.
REMOVE REAR NO. 2 SEAT CUSHION HINGE COVER |
 |
- Remove the 2 screws.
Disengage the 2 clips and remove the rear No. 2 seat cushion hinge cover.
| 3.
REMOVE RECLINING COVER PROTECTOR LH |
 |
- Remove the 2 screws and reclining cover protector LH.
| 4.
REMOVE NO. 2 SEAT OUTER HINGE COVER LH |
 |
- Remove the 2 screws and No. 2 seat outer hinge cover LH.
| 5.
REMOVE REAR NO. 2 SEAT CUSHION COVER WITH PAD LH |
 |
- Using a "T45" TORX socket wrench, remove the 2 bolts and 2 bushes.
- Remove the 2 bolts and rear No. 2 seat cushion cover with pad LH.
| 6.
REMOVE REAR NO. 2 SEAT CUSHION COVER SUB-ASSEMBLY LH |
 |
- Remove the 2 hog rings.
- Disengage each hook.
- Disengage the 3 hooks.
- Remove the 7 hog rings and rear No. 2 seat cushion cover sub-assembly LH.
| 7.
REMOVE NO. 2 SEATBACK BOARD SUB-ASSEMBLY LH |
 |
- Disengage the 6 claws and remove the No. 2 seatback board sub-assembly LH.
| 8.
REMOVE REAR NO. 2 SEATBACK COVER WITH PAD LH |
 |
- Disengage the 13 hooks.
Text in Illustration
*1
|
Fastener
|
Disengage the fastener.
- Disengage the hook.
- Remove the 2 screws.
Disengage the hook as shown in the illustration and remove the rear side seat band sub-assembly LH with rear No. 1 seat cover bezel LH.
- Remove the rear No. 1 seat cover bezel LH.
- Disengage the 8 clips and remove the rear No. 2 seatback cover with pad LH.
| 9.
REMOVE REAR NO. 2 SEATBACK COVER SUB-ASSEMBLY LH |
 |
- Remove the 9 hog rings and the rear No. 2 seatback cover sub-assembly LH.
| 10.
REMOVE REAR SEAT HEADREST COVER LH |
 |
- Remove the 2 screws and rear seat headrest cover LH.
| 11.
REMOVE REAR NO. 2 SEAT HEADREST ASSEMBLY LH |
 |
- Disconnect the 2 cable clamps.
Remove the 3 nuts and rear No. 2 seat headrest assembly LH.
| 12.
REMOVE REAR SEATBACK EDGE PROTECTOR LH |
 |
- Disengage the 4 claws and remove the 2 rear seatback edge protectors LH.
| 13.
REMOVE REAR NO. 1 SEAT LOWER CUSHION HINGE COVER LH |
 |
- Disengage the 2 claws and remove the rear No. 1 seat lower cushion hinge cover LH.
| 14.
REMOVE REAR NO. 1 SEAT LOWER CUSHION HINGE COVER RH |
 |
- Disengage the 2 claws and remove the rear No. 1 seat lower cushion hinge cover RH.
| 15.
REMOVE REAR NO. 2 SEAT OUTER RECLINING COVER LH |
 |
- Remove the screw.
Disengage the claw and guide, and remove the rear No. 2 seat outer reclining cover LH.
| 16.
REMOVE REAR NO. 2 SEAT INNER RECLINING COVER LH |
 |
- Remove the screw.
Disengage the 2 claws and remove the rear No. 2 seat inner reclining cover LH.
| 17.
REMOVE NO. 2 SEAT INNER HINGE COVER LH |
 |
- Disengage the claw and remove the No. 2 seat inner hinge cover LH.
| 18.
REMOVE REAR NO. 1 SEAT LOCK CABLE ASSEMBLY LH |
 |
- Disengage the 2 cable clamps and remove the rear No. 1 seat lock cable assembly LH.
| 19.
REMOVE REAR NO. 2 SEAT CUSHION LOCK CABLE ASSEMBLY LH |
 |
- Disengage the 4 cable clamps and remove the rear No. 2 seat cushion lock cable assembly LH.
| 20.
REMOVE REAR NO. 2 SIDE SEAT BAND SUB-ASSEMBLY LH |
 |
- Using a drill bit with a diameter of less than 4 mm (0.158 in.), drill out the rivet head and remove the rear No. 2 side seat band sub-assembly LH.
| 21.
REMOVE REAR SEAT OUTER SUSPENSION LINK SUB-ASSEMBLY LH |
 |
- Remove the 2 nuts and the rear seat outer suspension link sub-assembly LH.
- Remove the E-ring.
Disengage the hook and remove the spring.
| 22.
REMOVE REAR SEAT INNER SUSPENSION LINK SUB-ASSEMBLY LH |
 |
- Remove the 2 nuts and rear seat inner suspension link sub-assembly LH.
| 23.
REMOVE NO. 2 SEATBACK FRAME SUB-ASSEMBLY LH |
 |
Remove the 2 bolts <A>.


Remove the bolt <B>.
Remove the 2 nuts <C> and No. 2 seatback frame sub-assembly LH.
| 24.
REMOVE RECLINING COVER PROTECTOR RH |
 |
- Remove the 2 screws and reclining cover protector RH.
| 25.
REMOVE NO. 2 SEAT OUTER HINGE COVER RH |
 |
- Remove the 2 screws and No. 2 seat outer hinge cover RH.
| 26.
REMOVE REAR SEAT CUSHION COVER WITH PAD RH |
 |
- Using a "T45" TORX socket wrench, remove the 2 bolts and 2 bushes.
- Remove the 2 bolts and rear No. 2 seat cushion cover with pad RH.
| 27.
REMOVE NO. 2 SEAT CUSHION COVER SUB-ASSEMBLY RH |
 |
- Remove the 2 hog rings.
- Disengage each hook.
- Disengage the 3 hooks.
- Remove the 7 hog rings and rear No. 2 seat cushion cover sub-assembly RH.
| 28.
REMOVE NO. 2 SEATBACK BOARD SUB-ASSEMBLY RH |
 |
- Disengage the 6 claws and remove the No. 2 seatback board sub-assembly RH.
| 29.
REMOVE NO. 2 SEATBACK COVER WITH PAD RH |
 |
- Disengage the 13 hooks.
Text in Illustration
*1
|
Fastener
|
Disengage the fastener.
- Disengage the hook.
- Remove the 2 screws.
Disengage the hook as shown in the illustration and remove the rear side seat band sub-assembly RH with rear No. 1 seat cover bezel RH.
- Remove the rear No. 1 seat cover bezel RH.
- Disengage the 8 clips and remove the rear No. 2 seatback cover with pad RH.
| 30.
REMOVE NO. 2 SEATBACK COVER SUB-ASSEMBLY RH |
 |
- Remove the 9 hog rings and rear No. 2 seatback cover sub-assembly RH.
| 31.
REMOVE REAR SEAT HEADREST COVER RH |
 |
- Remove the 2 screws and rear No. 2 seat headrest cover RH.
| 32.
REMOVE NO. 2 SEAT HEADREST ASSEMBLY RH |
 |
- Disconnect the 2 cable clamps.
Remove the 3 nuts and rear No. 2 seat headrest assembly RH.
| 33.
REMOVE REAR SEAT BACK EDGE PROTECTOR RH |
 |
- Disengage the 4 claws and remove the 2 rear seatback edge protectors RH.
| 34.
REMOVE REAR NO. 2 SEAT LOWER CUSHION HINGE COVER LH |
 |
- Disengage the 2 claws and remove the rear No. 2 seat lower cushion hinge cover LH.
| 35.
REMOVE REAR NO. 2 SEAT LOWER CUSHION HINGE COVER RH |
 |
- Disengage the 2 claws and remove the rear No. 2 seat lower cushion hinge cover RH.
| 36.
REMOVE NO. 2 SEAT HINGE COVER RH |
 |
- Remove the screw.
Disengage the claw and guide, and remove the No. 2 seat hinge cover RH.
| 37.
REMOVE REAR NO. 2 SEAT RECLINING COVER RH |
 |
- Remove the screw.
Disengage the 2 claws and remove the rear No. 2 seat reclining cover RH.
| 38.
REMOVE NO. 2 SEAT INNER HINGE COVER RH |
 |
- Disengage the claw and remove the No. 2 seat inner hinge cover RH.
| 39.
REMOVE REAR NO. 1 SEAT LOCK CABLE ASSEMBLY RH |
 |
- Disengage the 2 cable clamps and remove the rear No. 1 seat lock cable assembly RH.
| 40.
REMOVE REAR NO. 2 SEAT CUSHION LOCK CABLE ASSEMBLY RH |
 |
- Disengage the 4 cable clamps and remove the rear No. 2 seat lock cable assembly RH.
| 41.
REMOVE REAR NO. 2 SIDE SEAT BAND SUB-ASSEMBLY RH |
 |
- Using a drill bit with a diameter of less than 4 mm (0.158 in.), drill out the rivet head and remove the rear No. 2 side seat band sub-assembly RH.
| 42.
REMOVE REAR SEAT OUTER SUSPENSION LINK SUB-ASSEMBLY RH |
 |
- Remove the 2 nuts and rear seat outer suspension link sub-assembly RH.
- Remove the E-ring.
Disengage the hook and remove the spring.
| 43.
REMOVE REAR SEAT INNER SUSPENSION LINK SUB-ASSEMBLY RH |
 |
- Remove the 2 nuts and rear seat inner suspension link sub-assembly RH.
| 44.
REMOVE NO. 2 SEATBACK FRAME SUB-ASSEMBLY RH |
 |
- Remove the 2 bolts.
Remove the 2 nuts and No. 2 seatback frame sub-assembly RH.