INSTALLATION
Removal / installation · Vehicles built from Jul 2010
Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010 from Jul 2010
| 1.
INSTALL FRONT NO. 1 SPEAKER ASSEMBLY |
 |
- Install the front No. 1 speaker assembly with the 4 bolts.
- NOTICE:
- Do not touch the cone part of the speaker.
Connect the connector.
| 2.
INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY
|
 |
Connect the connector.
- Connect the front door lock remote control cable and front door inside locking cable to the front door inside handle sub-assembly.
Engage the 2 clamps.
- Engage the front door trim board with the 5 claws on the front door inner glass weatherstrip.
Engage the 9 clips.
- Install the 2 screws <B>.
Install the screw <A> and front door trim board to the front door panel.
-
Torque:
- 3.5 N*m{
36 kgf*cm
, 31 in.*lbf
}
| 3.
INSTALL COURTESY LIGHT ASSEMBLY
|
 |
Connect the connector.
- Engage the claw and install the courtesy light assembly.
| 4.
INSTALL ASSIST GRIP COVER
|
 |
- Engage the 4 claws and install the assist grip cover.
| 5.
INSTALL FRONT ARMREST UPPER BASE PANEL
|
 |
Connect the connector.
- Engage the 7 claws and clip and install the front armrest upper base panel.
| 6.
INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG
|
 |
- Engage the 3 claws and install the front door inside handle bezel plug.
| 7.
INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH
|
 |
- Engage the clip and claw, and install the front door lower frame bracket garnish.