ON-VEHICLE INSPECTION
Inspection · Vehicles built May 2007 – Jun 2010
Versions by build date: May 2007 – Jun 2010 from Jul 2010
| INSPECT FRONT NO. 1 SPEAKER |
- HINT:
- Remove interior parts so that the front No. 1 speaker can be seen.
Check the speaker installation.
- OK:
- The speaker is securely installed.
Visually check the speaker.
- OK:
- The cone paper of the speaker is not torn.
Speaker resistance check
Disconnect the front No. 1 speaker connector.
Measure the resistance between the terminals of the speaker.
- Standard resistance:
Tester Connection
Condition
Specified Condition
1 - 2
Always
Approximately 4 Ω
