2007-2013 Highlander Kluger · Service Manual BODY ELECTRICAL

ON-VEHICLE INSPECTION

Inspection · Vehicles built from Jul 2010

Versions by build date: May 2007 – Jun 2010 from Jul 2010


INSPECT FRONT NO. 1 SPEAKER ASSEMBLY
  1. With the speaker installed, check that there is no looseness or other abnormalities.

  1. Check that there is no foreign matter in the speaker, no tears on the speaker's cone part or other abnormalities.

  1. E165683E84
    Measure the resistance of the speaker.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    1 - 2
    Always
    3.2 to 4.8 Ω

    If the result is not as specified, replace the speaker assembly.
    Text in Illustration 
    *a
    Component without harness connected
    (Front No. 1 Speaker Assembly)

← ON-VEHICLE INSPECTION (May 2007 – Jun 2010)REMOVAL (May 2007 – Jul 2008) →