REMOVAL
Removal / installation · Vehicles built May 2007 – Jul 2008
Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010 from Jul 2010
| 1.
REMOVE REAR DOOR ARMREST UPPER BASE PANEL
|
 |
- Using a screwdriver with the tip wrapped with protective tape, disengage the 6 claws and 2 clips, and remove the rear door armrest upper base panel.
Disconnect the connector.
| 2.
REMOVE REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY |
 |
- Disengage the 2 claws and remove the rear power window regulator switch assembly.