2007-2013 Highlander Kluger · Service Manual BODY

REMOVAL

Removal / installation · Vehicles built Aug 2008 – Jun 2010

Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010 from Jul 2010


1. REMOVE REAR DOOR ARMREST UPPER BASE PANEL

  1. B172987E01
    Using a screwdriver with the tip wrapped with protective tape, disengage the 6 claws and 2 clips, and remove the rear door armrest upper base panel.

  1. Disconnect the connector.


2. REMOVE REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY

  1. B173154
    Disengage the 2 claws and remove the rear power window regulator switch assembly.

← REMOVAL (May 2007 – Jul 2008)REMOVAL (from Jul 2010) →