2007-2013 Highlander Kluger · Service Manual BODY

DISASSEMBLY

Removal / installation · Vehicles built from May 2007


1. REMOVE REAR CENTER SEAT HEADREST ASSEMBLY

2. REMOVE REAR SEATBACK LOCK COVER CAP

  1. B174534E01
    Using a screwdriver wrapped with protective tape, disengage the 2 claws and remove the rear seatback lock cover cap.


3. REMOVE REAR SEATBACK INNER COVER (for RHD)

  1. B205822
    Disengage the 4 claws to remove the rear seatback inner cover.


4. REMOVE REAR SEAT LEG REST LOCK COVER

  1. B205823
    Disengage the 3 claws and remove the rear seat leg rest lock cover.


5. REMOVE REAR SEATBACK BOARD SUB-ASSEMBLY

  1. B174538
    Remove the 2 screws.

  1. Disengage the 3 clips and remove the rear seatback board sub-assembly.


6. REMOVE REAR CENTER SEAT HEADREST SUPPORT ASSEMBLY LH

  1. B205826
    Disengage the 2 claws and remove the rear center seat headrest support assembly LH.


7. REMOVE REAR CENTER SEAT HEADREST SUPPORT ASSEMBLY RH

  1. B205825
    Disengage the 2 claws and remove the rear center seat headrest support assembly RH.


8. REMOVE CENTER SEATBACK COVER SUB-ASSEMBLY

  1. B205827
    Disengage the 9 hooks.

  1. Disengage the 2 clips.

  1. B205828
    Remove the 4 clips and the center seatback cover sub-assembly.


9. REMOVE NO. 2 SEATBACK COVER SUB-ASSEMBLY

  1. B205829
    Remove the 4 screws and the No. 2 seatback cover sub-assembly.


10. REMOVE REAR CENTER SEATBACK PAD

  1. B205830
    Remove the rear center seatback pad.


11. REMOVE REAR SEAT HINGE COVER LH

  1. B205832
    Remove the 2 screws.

  1. Disengage the claw and the guide to remove the rear seat hinge cover LH.


12. REMOVE REAR SEAT HINGE COVER RH

  1. B205833
    Remove the 2 screws.

  1. Disengage the claw and the guide to remove the rear seat hinge cover RH.


13. REMOVE REAR CENTER SEATBACK FRAME ASSEMBLY

  1. B205834
    Disconnect the 3 cable clamps.

  1. Using a T45 "TORX" socket, remove the 2 "TORX" bolts and the rear center seatback frame assembly.

  1. B205835
    Remove the bush.


14. REMOVE REAR SEATBACK PROTECTOR

  1. B205837
    Remove the screw.

  1. Disengage the guide and remove the rear seatback protector.


15. REMOVE REAR SEAT TURN CABLE ASSEMBLY

  1. B205838
    Remove the nut.

  1. Disengage the guide and remove the rear seat turn cable assembly.


16. REMOVE CENTER SEAT CUSHION COVER SUB-ASSEMBLY

  1. B205839
    Disengage the 15 claws and remove the center seat cushion cover sub-assembly.


17. REMOVE CENTER SEAT CUSHION PAD

  1. B205840
    Remove the center seat cushion pad.


18. REMOVE REAR SEATBACK LOCK STRIKER PROTECTOR

  1. B205842
    Remove the rear seatback lock striker protector.


19. REMOVE REAR SEAT LOCK STRIKER

  1. B205844
    Using a T45 "TORX" socket, remove the rear seat lock striker.


20. REMOVE NO. 2 REAR SEAT CUSHION COVER SUB-ASSEMBLY

  1. B205846
    Remove the 3 screws and the No. 2 rear seat cushion cover sub-assembly.


21. REMOVE REAR SEAT CUSHION HINGE CAP

  1. B205847
    Disengage the 2 claws and remove the rear seat cushion hinge cap.


22. REMOVE NO. 2 REAR SEAT CUSHION UNDER COVER (for RHD)

  1. B180408
    Disengage the 4 claws and remove the No. 2 rear seat cushion under cover.

← COMPONENTS (from May 2007)REASSEMBLY (from May 2007) →