REASSEMBLY
Removal / installation · Vehicles built from May 2007
| 1. INSTALL NO. 2 REAR SEAT CUSHION UNDER COVER (for RHD) |
Engage the 4 claws to install the No. 2 rear seat cushion under cover.

| 2. INSTALL REAR SEAT CUSHION HINGE CAP |
Engage the 2 claws to install the rear seat cushion hinge cap.

| 3. INSTALL NO. 2 REAR SEAT CUSHION COVER SUB-ASSEMBLY |
Install the No. 2 rear seat cushion cover sub-assembly with the 3 screws.

| 4. INSTALL REAR SEAT LOCK STRIKER |
Using a T45 "TORX" socket, install the rear seat lock striker.

- Torque:
- 21 N*m{ 214 kgf*cm , 16 ft.*lbf }
| 5. INSTALL REAR SEATBACK LOCK STRIKER PROTECTOR |
Install the rear seatback lock striker protector.

| 6. INSTALL CENTER SEAT CUSHION PAD |
Install the center seat cushion pad.

| 7. INSTALL CENTER SEAT CUSHION COVER SUB-ASSEMBLY |
Engage the 15 claws to install the center seat cushion cover sub-assembly.

| 8. INSTALL REAR SEAT TURN CABLE ASSEMBLY |
Insert the guide.

Install the rear seat turn cable assembly with the nut.
- Torque:
- 6.5 N*m{ 66 kgf*cm , 58 in.*lbf }
| 9. INSTALL REAR SEATBACK PROTECTOR |
Engage the guide.

Install the rear seatback protector with the screw.
| 10. INSTALL REAR CENTER SEATBACK FRAME ASSEMBLY |
Install the bush.

Using a T45 "TORX" socket, install the 2 "TORX" bolts to the rear center seatback frame assembly.

- Torque:
- 21 N*m{ 214 kgf*cm , 16 ft.*lbf }
Engage the 3 cable clamps to install the cable.
| 11. INSTALL REAR SEAT HINGE COVER RH |
Engage the guide and the claw.

Install the rear seat hinge cover RH with the 2 screws.
| 12. INSTALL REAR SEAT HINGE COVER LH |
Engage the guide and the claw.

Install the rear seat hinge cover LH with the 2 screws.
| 13. INSTALL REAR CENTER SEATBACK PAD |
Install the center seatback pad to the No. 1 seat cushion frame sub-assembly.

| 14. INSTALL NO. 2 SEATBACK COVER SUB-ASSEMBLY |
Install the No. 2 seatback cover sub-assembly with the 4 screws.

| 15. INSTALL CENTER SEATBACK COVER SUB-ASSEMBLY |
Temporarily install the center seatback cover sub-assembly with the 4 clips.

Install the 2 clips.

Engage the 9 hooks to install the center seatback cover sub-assembly.
| 16. INSTALL REAR CENTER SEAT HEADREST SUPPORT ASSEMBLY RH |
Engage the 2 claws to install the rear center seat headrest support assembly RH.

| 17. INSTALL REAR CENTER SEAT HEADREST SUPPORT ASSEMBLY LH |
Engage the 2 claws to install the rear center seat headrest support assembly LH.

| 18. INSTALL REAR SEATBACK BOARD SUB-ASSEMBLY |
Engage the 3 clips.

Install the rear seatback board sub-assembly with the 2 screws.
| 19. INSTALL REAR SEAT LEG REST LOCK COVER |
Engage the 3 claws to install the rear seat leg rest lock cover.

| 20. INSTALL REAR SEATBACK INNER COVER (for RHD) |
Engage the 4 claws to install the rear seatback inner cover.

| 21. INSTALL REAR SEATBACK LOCK COVER CAP |
Engage the 2 claws to install the rear seatback lock cover cap.

| 22. INSTALL REAR CENTER SEAT HEADREST ASSEMBLY |
