2007-2013 Highlander Kluger · Service Manual BODY

INSTALLATION

Removal / installation · Vehicles built from Jul 2010

Versions by build date: May 2007 – Jun 2010 from Jul 2010

HINT:
When installing a new name plate and emblem, heat the vehicle body, name plate and emblem using a heat light.

Heating temperature:
Item
Temperature
Vehicle Body
40 to 60°C (104 to 140°F)
Name Plate, Emblem
20 to 30°C (68 to 86°F)

NOTICE:
Do not heat the vehicle body, name plate or emblem excessively.


1. INSTALL SYMBOL EMBLEM
  1. Clean the vehicle body surface.

    1. Using a heat light, heat the vehicle body surface.

    2. Remove any double-sided tape from the vehicle body.

    3. Wipe off any tape adhesive residue with cleaner.

  1. Install a new symbol emblem.

    1. Using a heat light, heat the vehicle body and a new symbol emblem.

    2. Remove the release paper from the symbol emblem.

      HINT:
      After removing the release paper, keep the exposed adhesive free from foreign matter.

    3. Install the symbol emblem as shown in the illustration.

      B172810E01


2. INSTALL NO. 2 BACK DOOR NAME PLATE
  1. Clean the vehicle body surface.

    1. Using a heat light, heat the vehicle body surface.

    2. Remove any double-sided tape from the vehicle body.

    3. Wipe off any tape adhesive residue with cleaner.

  1. Install a new name plate.

    1. Using a heat light, heat the vehicle body and a new name plate.

    2. Remove the release paper from the name plate.

      HINT:
      After removing the release paper, keep the exposed adhesive free from foreign matter.

    3. Install the name plate as shown in the illustration.

      B262767E01

      Standard measurement:
      Dimension
      Measurement
      A
      96.9 mm (3.815 in.)
      B
      218.9 mm (8.618 in.)
      C
      269.5 mm (10.610 in.)
      D
      268.7 mm (10.579 in.)
      Text in Illustration 
      *1
      Standard Line
      -
      -


3. INSTALL NO. 4 BACK DOOR NAME PLATE
  1. Clean the vehicle body surface.

    1. Using a heat light, heat the vehicle body surface.

    2. Remove any double-sided tape from the vehicle body.

    3. Wipe off any tape adhesive residue with cleaner.

  1. Install a new name plate.

    1. Using a heat light, heat the vehicle body and a new name plate.

    2. Remove the release paper from the name plate.

      HINT:
      After removing the release paper, keep the exposed adhesive free from foreign matter.

    3. Install the name plate as shown in the illustration.

      B262764E01

      Standard measurement:
      Dimension
      Measurement
      A
      105.1 mm (4.138 in.)
      B
      166.0 mm (6.535 in.)
      C
      256.2 mm (10.087 in.)
      D
      254.0 mm (9.999 in.)
      Text in Illustration 
      *1
      Standard Line
      -
      -


4. INSTALL BACK DOOR NAME PLATE
  1. Clean the vehicle body surface.

    1. Using a heat light, heat the vehicle body surface.

    2. Remove any double-sided tape from the vehicle body.

    3. Wipe off any tape adhesive residue with cleaner.

  1. Install a new name plate.

    1. Using a heat light, heat the vehicle body and a new name plate.

    2. Remove the release paper from the name plate.

      HINT:
      After removing the release paper, keep the exposed adhesive free from foreign matter.

    3. Install the name plate as shown in the illustration.
      for AWD plate:

      B262765E01

      Standard measurement:
      Dimension
      Measurement
      A
      46.0 mm (1.811 in.)
      B
      133.0 mm (5.236 in.)
      C
      60.2 mm (2.370 in.)
      D
      57.0 mm (2.244 in.)
      Text in Illustration 
      *1
      Standard Line
      -
      -

      for 4WD plate:

      B262766E01

      Standard measurement:
      Dimension
      Measurement
      A
      37.5 mm (1.476 in.)
      B
      141.3 mm (5.563 in.)
      C
      61.2 mm (2.409 in.)
      D
      57.1 mm (2.248 in.)
      Text in Illustration 
      *1
      Standard Line
      -
      -


5. INSTALL FRONT DOOR NAME PLATE
  1. Clean the vehicle body surface.

    1. Using a heat light, heat the vehicle body surface.

    2. Remove any double-sided tape from the vehicle body.

    3. Wipe off any tape adhesive residue with cleaner.

  1. Install a new name plate.

    1. Using a heat light, heat the vehicle body and a new name plate.

    2. Remove the release paper from the name plate.

      HINT:
      After removing the release paper, keep the exposed adhesive free from foreign matter.

    3. Install the name plate as shown in the illustration.
      for LIMITED plate on LH side:

      B172813E01

      Standard measurement:
      Dimension
      Measurement
      A
      100.6 mm (3.961 in.)
      B
      276.3 mm (10.878 in.)
      C
      173.3 mm (6.823 in.)
      D
      174.9 mm (6.886 in.)

      for LIMITED plate on RH side:

      B172814E01

      Standard measurement:
      Dimension
      Measurement
      A
      100.9 mm (3.972 in.)
      B
      276.3 mm (10.878 in.)
      C
      173.3 mm (6.823 in.)
      D
      174.9 mm (6.886 in.)

      for GRANDE plate on LH side:

      B172815E01

      Standard measurement:
      Dimension
      Measurement
      A
      99.8 mm (3.929 in.)
      B
      268.8 mm (10.583 in.)
      C
      173.3 mm (6.823 in.)
      D
      174.8 mm (6.882 in.)

      for GRANDE plate on RH side:

      B172816E01

      Standard measurement:
      Dimension
      Measurement
      A
      108.1 mm (4.256 in.)
      B
      277.1 mm (10.909 in.)
      C
      178.4 mm (7.024 in.)
      D
      174.9 mm (6.886 in.)

← INSTALLATION (May 2007 – Jun 2010)COMPONENTS (May 2007 – Jun 2010) →