2007-2013 Highlander Kluger · Service Manual BODY

REMOVAL

Removal / installation · Vehicles built from Jul 2010

Versions by build date: May 2007 – Jun 2010 from Jul 2010

HINT:
When removing the name plate and emblem, heat the vehicle body, name plate and emblem, using a heat light.

Heating temperature:
Item
Temperature
Vehicle Body
40 to 60°C (104 to 140°F)
Name Plate, Emblem
20 to 30°C (68 to 86°F)

NOTICE:
Do not heat the vehicle body, name plate or emblem excessively.


1. REMOVE SYMBOL EMBLEM

  1. B172806E01
    Put protective tape around the symbol emblem.

  1. Using a moulding remover, peel off the double-sided tape and remove the symbol emblem.

    NOTICE:
    Be careful not to damage the vehicle body.


2. REMOVE NO. 2 BACK DOOR NAME PLATE

  1. B172807E01
    Put protective tape around the name plate.

  1. Using a moulding remover, peel off the double-sided tape and remove the name plate.

    NOTICE:
    Be careful not to damage the vehicle body.


3. REMOVE NO. 4 BACK DOOR NAME PLATE

  1. B172808E01
    Put protective tape around the name plate.

  1. Using a moulding remover, peel off the double-sided tape and remove the name plate.

    NOTICE:
    Be careful not to damage the vehicle body.


4. REMOVE BACK DOOR NAME PLATE

  1. B172809E01
    Put protective tape around the name plate.

  1. Using a moulding remover, peel off the double-sided tape and remove the name plate.

    NOTICE:
    Be careful not to damage the vehicle body.


5. REMOVE FRONT DOOR NAME PLATE

  1. B172805E01
    Put protective tape around the name plate.

  1. Using a moulding remover, peel off the double-sided tape and remove the name plate.

    NOTICE:
    Be careful not to damage the vehicle body.

← REMOVAL (May 2007 – Jun 2010)INSTALLATION (May 2007 – Jun 2010) →