2007-2013 Highlander Kluger · Service Manual ENGINE

REMOVAL

Removal / installation · Vehicles built from Jul 2010

Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010 from Jul 2010


1. REMOVE ENGINE UNDER COVER ASSEMBLY

  1. A171849
    Remove the 2 bolts and engine under cover assembly RR.

  1. A171850
    Remove the 2 bolts, 2 screws, 5 clips and engine under cover assembly.


2. REMOVE NO. 1 ENGINE UNDER COVER

  1. A237657
    Remove the 6 bolts, 2 clips and No. 1 engine under cover.


3. REMOVE VACUUM HOSE SUB-ASSEMBLY

  1. A171739
    Disconnect the vacuum hose sub-assembly from the air cleaner cap sub-assembly and vacuum switching valve.

  1. A171740
    Remove the 2 clamps.

  1. A171741
    Disconnect the vacuum hose sub-assembly from the duty vacuum switching valve and remove it.


4. REMOVE DUTY VACUUM SWITCHING VALVE

  1. A172494
    Disconnect the duty vacuum switching valve connector and the clamp.

  1. A172486
    Remove the bolt.

  1. A172487
    Disconnect the hose from the duty vacuum switching valve and remove the duty vacuum switching valve.

← REMOVAL (Aug 2008 – Jun 2010)INSPECTION (from May 2007) →