2007-2013 Highlander Kluger · Service Manual BODY ELECTRICAL

Portable Player cannot be Connected Manually/Automatically

Circuit diagnosis · Vehicles built from Jul 2010

INSPECTION PROCEDURE

HINT:
Some versions of "Bluetooth" compatible audio players may not function, or the function may be limited using the navigation receiver assembly, even if the portable audio player itself can play files (Click here).


1. CHECK CONNECTED DEVICE SETTINGS

  1. E176595E05
    Display the "Select Portable Player" screen and check if the portable player is registered as a connected device.

    NOTICE:
    If a cellular phone is used as a portable player, it must be registered independently from the registration that is performed for the hands-free system.

    HINT:
    Only 2 portable players can be registered.

    Result:
    Result
    Proceed to
    The portable player is registered as a connected device.
    A
    The portable player is not registered as a connected device.
    B

Text in Illustration 
*a
Example


B
REGISTER PORTABLE PLAYER AS CONNECTED DEVICE
A


2. CHECK SYMPTOMS
  1. Check the connection condition between the portable player and navigation receiver assembly.

    HINT:
    The portable player cannot be connected under any of the following conditions:
    1. The portable player is connected to another device.
    2. The portable player is connected to the navigation receiver assembly using the hands-free function.
    3. The navigation receiver assembly has cleared the portable player registration.
    4. The portable player is off.

    Result:
    Result
    Proceed to
    The portable player cannot be connected automatically.
    A
    The portable player cannot connect manually.
    B



B
Go to step 4
A


3. CHECK AUTOMATIC CONNECTION SETTINGS

  1. Display the "BT Audio Setting" screen and check automatic connection settings of the "Bluetooth" audio.

    1. E176593E05
      Check if "On" is displayed for "Auto Bluetooth Connect" on the "BT Audio Setting" screen.

      OK:
      "On" is displayed for "Auto Bluetooth Connect".

Text in Illustration 
*a
Example


NG
CHANGE AUTO BLUETOOTH CONNECT TO "On"
OK


4. CHECK PORTABLE PLAYER STATUS
  1. Check the status of the portable player.

    1. Check that the portable player is in standby mode.

    2. Check that the portable player is not connected to another device (headphones etc.).

      OK:
      The portable player is in standby mode and not connected to another device (headphones etc.).



NG
CHANGE PORTABLE PLAYER TO STANDBY MODE AND DISCONNECT OTHER DEVICES (HEADPHONES etc.)
OK


5. CHECK USING ANOTHER "Bluetooth" AUDIO COMPATIBLE VEHICLE OF SAME MODEL
  1. Check if the portable player can be connected manually/automatically on another "Bluetooth" audio compatible vehicle of the same model.

    OK:
    The portable player can be connected manually/automatically.



NG
PORTABLE PLAYER IS NOT COMPATIBLE
OK


6. REMOVE ADDITIONAL DEVICES WHICH USE RADIO WAVES
  1. Remove additional devices which use radio waves.

  1. Check if the portable player can be connected manually/automatically.

    OK:
    The portable player can be connected manually/automatically.



NG
PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)
OK

END


← Noise Occurs or Sound Skips when Portable Player Plays (from Jul 2010)Registered Device cannot be Deleted (from Jul 2010) →