2007-2013 Highlander Kluger · Service Manual CRUISE CONTROL SYSTEM

P0575 Cruise Control Input Circuit

Diagnostic trouble codes · Vehicles built from Jul 2010

DESCRIPTION

This DTC indicates internal abnormalities of the ECM.
DTC No.
Detection Item
Trouble Area
P0575
The ECM has a supervisory CPU and control ECU inside. When each input STP signal is different for 0.15 sec. or more, this trouble code is output.
This trouble code is output after 0.4 sec. has passed from the time the cruise cancel input signal (STP input) is input into the ECM.

HINT:
When a trouble code is detected, the fail safe must be kept on until the ignition switch is turned off.

ECM

INSPECTION PROCEDURE


1. REPLACE ECM
Replace the ECM (Click here).

NEXT

END


← P0571 Brake Switch "A" Circuit (from Jul 2010)P0607 Input Signal Circuit Malfunction (May 2007 – Jul 2008) →