2007-2013 Highlander Kluger · Service Manual BODY

DISASSEMBLY

Removal / installation · Vehicles built from Jul 2010


1. REMOVE OUTER MIRROR GLASS (w/o Heater)

  1. B173445E01
    Apply protective tape to the bottom of the visor of the door mirror.

  1. Push the upper part of the mirror surface and tilt it.

  1. Using a screwdriver with the tip wrapped with protective tape, disengage the 2 claws.

  1. B173446
    Disengage the 2 claws at the upper part of the outer mirror.

  1. Remove the outer mirror glass.


2. REMOVE OUTER MIRROR GLASS (w/ Heater)

  1. B173445E01
    Apply protective tape to the bottom of the visor of the door mirror.

  1. Push the upper part of the mirror surface and tilt it.

  1. Using a screwdriver with the tip wrapped with protective tape, disengage the 2 claws.

  1. B173446
    Disengage the 2 claws at the upper part of the outer mirror.

  1. B173447
    Disconnect the connectors and remove the outer mirror glass.


3. REMOVE LENS COVER

  1. B262175
    Remove the 2 screws.

  1. Disengage the 2 guides.

  1. B262176
    Remove the lens cover as shown in the illustration.

  1. Remove the outer mirror holder.


4. REMOVE OUTER MIRROR COVER

  1. B173461
    Disengage the 8 claws and remove the outer mirror cover from the outer rear view mirror assembly with cover.

← REMOVAL (from Jul 2010)INSPECTION (May 2007 – Jun 2010) →