SIDE AIRBAG SENSOR > REMOVAL |
| 1. PRECAUTION |
| 2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 3. REMOVE FRONT DOOR SCUFF PLATE |
![]() |
Disengage the 8 claws and guide, and remove the front door scuff plate LH.
| 4. DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP |
![]() |
Remove the front door opening trim weatherstrip LH.
| 5. REMOVE REAR DOOR SCUFF PLATE |
![]() |
Disengage the 5 claws, 3 clips and guide, and remove the rear door scuff plate LH.
| 6. DISCONNECT REAR DOOR OPENING TRIM WEATHERSTRIP |
![]() |
Remove the rear door opening trim weatherstrip LH.
| 7. REMOVE LOWER CENTER PILLAR GARNISH |
![]() |
Disengage the 2 claws and 2 clips, and remove the lower center pillar garnish LH.
| 8. REMOVE SIDE AIRBAG SENSOR |
![]() |
Disconnect the connector from the side airbag sensor.
Remove the bolt and disengage the pin, and remove the side airbag sensor.