Home › ENGINE › 2GR-FE STARTING › SMART KEY SYSTEM

SMART KEY SYSTEM > PROBLEM SYMPTOMS TABLE

for Preparation Click here


HINT:
  1. Use the table below to help determine the cause of the problem symptom. The potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
  2. Inspect the fuses and relays related to the system before inspecting the suspected areas below.


PUSH-BUTTON START FUNCTION: 
Symptom
Suspected Area
See page
Power source mode does not change.
AM2 Fuse
Click here
Engine Switch
-
Wire Harness or Connector
-
Smart Key System (Entry Function)
-
Main Body ECU (Instrument Panel Junction Block)
-
ACC Relay
-
IG1 Relay
-
IG2 Relay
-
Engine does not start.
Smart Key System (Entry)
Click here
Engine Switch
-
Park/Neutral Position Switch
-
STOP Fuse
-
Stop Light Switch
-
Electrical Steering Lock Function
-
Starter Cut Relay
-
Starter Relay
-
ECM
-
Engine Immobiliser System
-
Main Body ECU (Instrument Panel Junction Block)
-
Wire Harness or Connector
-
Engine switch indicator light does not come on.
Engine Switch Indicator Light Circuit
Click here