TIRE PRESSURE WARNING SYSTEM > REGISTRATION |
| 1. DESCRIPTION OF CODE REGISTRATION |
Before registration
When replacing the tire pressure:
When replacing a tire pressure warning valve and transmitter:

| 2. REGISTER TRANSMITTER ID (USING TECHSTREAM) |
Set the air pressure of all tires to the specified value (Click here).
Turn the ignition switch off.
Connect Techstream to the DLC3.
Turn the ignition switch on (IG) and turn the tester ON.
Enter the menu items in this order: Chassis / Tire Pressure Monitor / Utility / ID Registration.
Perform the following procedures displayed on the screen.
Confirmation of transmitter ID registration.
Enter the menu items in this order: Chassis / Tire Pressure Monitor / Data List.
Read the "ID Tire Inflation Pressure" values.
Confirm that the data of tire pressure of all tires are displayed on the screen.