NAVIGATION SYSTEM > HOW TO PROCEED WITH TROUBLESHOOTING |
| 1.VEHICLE BROUGHT TO WORKSHOP |
| |||||
| 2.DIAGNOSTIC QUESTIONING AND SYMPTOM CONFIRMATION |
Ask the customer about symptoms and confirm malfunctions.
|
| ||||
|
|
| 3.CONFIRM THE SYSTEM NORMAL CONDITION |
Refer to the "SYSTEM NORMAL CONDITION CHECK" (Click here).
|
| ||||
|
|
| 4.CHECK FOR DTC |
Refer to the "DTC CHECK/CLEAR" (Click here).
|
| ||||
|
|
| 5.DTC CLEAR |
Clear the DTCs and finish the diagnostic mode.
| |||||
| 6.RECHECK FOR DTC |
|
| ||||
|
|
| 7.DIAGNOSTIC TROUBLE CODE CHART |
Find the output code in the diagnostic trouble code chart (Click here).
|
|
| 8.PROBLEM SYMPTOMS TABLE |
Find the applicable symptom in the problem symptoms table (Click here).
|
| ||||
|
|
| 9.CHECK THE ECU TERMINAL ARRANGEMENT BASED ON THE MALFUNCTION SYMPTOM |
Refer to the "TERMINALS OF ECU" (Click here).
| |||||
| 10.CHECK THE CIRCUIT |
Adjust, repair, or replace as necessary.
| |||||
| 11.RECHECK FOR DIAGNOSTIC TROUBLE CODE |
| |||||
| 12.PERFORM CONFIRMATION TEST |
|
| ||||
|---|---|---|---|---|---|