REAR SHOCK ABSORBER > INSTALLATION |
| 1. INSTALL REAR LOWER COIL SPRING INSULATOR |
![]() |
Install the rear lower coil spring insulator onto the rear shock absorber assembly.
| 2. INSTALL REAR NO. 1 SPRING BUMPER |
![]() |
Install the rear No. 1 spring bumper to the rear shock absorber assembly.
| 3. TEMPORARILY INSTALL REAR COIL SPRING |
Using SST, compress the rear coil spring.

![]() |
Temporarily install the rear coil spring together with SST to the rear shock absorber assembly.
| 4. INSTALL REAR SUSPENSION SUPPORT ASSEMBLY |
![]() |
Install the rear suspension support assembly to the rear shock absorber assembly.
| 5. INSTALL REAR SUPPORT TO REAR SHOCK ABSORBER COLLAR |
![]() |
Install the rear support to rear shock absorber collar to the rear shock absorber assembly.
| 6. TEMPORARILY INSTALL REAR SUPPORT TO REAR SHOCK ABSORBER NUT |
![]() |
Temporarily install the rear support to rear shock absorber nut to the rear shock absorber assembly.
| 7. INSTALL REAR COIL SPRING |
Install the rear coil spring.

| 8. INSTALL REAR SHOCK ABSORBER WITH COIL SPRING (for 2WD) |
![]() |
Install the rear shock absorber with coil spring with the 3 nuts.
![]() |
Install the rear shock absorber with coil spring with the 2 bolts and 2 nuts.
![]() |
Fully tighten the rear support to rear shock absorber nut.
| 9. INSTALL REAR SHOCK ABSORBER WITH COIL SPRING (for 4WD) |
![]() |
Install the rear shock absorber with coil spring with the 3 nuts.
![]() |
Install the rear shock absorber with coil spring with the 2 bolts and 2 nuts.
![]() |
Fully tighten the rear support to rear shock absorber nut.
| 10. INSTALL REAR NO. 1 SUSPENSION SUPPORT COVER |
![]() |
Install the rear No. 1 suspension support cover.
| 11. INSTALL REAR STABILIZER LINK ASSEMBLY (for 2WD) |
![]() |
Install the rear stabilizer link assembly to the rear shock absorber with coil spring with the nut.
| 12. INSTALL REAR STABILIZER LINK ASSEMBLY (for 4WD) |
![]() |
Install the rear stabilizer link assembly to the rear shock absorber with coil spring with the nut.
| 13. INSTALL REAR SPEED SENSOR WIRE (for 2WD) |
![]() |
Install the rear speed sensor wire to the rear shock absorber with coil spring with the bolt.
| 14. INSTALL REAR SPEED SENSOR (for 4WD) |
![]() |
Install the rear speed sensor to the rear shock absorber with coil spring with the bolt.
| 15. INSTALL REAR FLEXIBLE HOSE (for 2WD) |
![]() |
Install the rear flexible hose to the rear shock absorber with coil spring with the bolt.
| 16. INSTALL REAR FLEXIBLE HOSE (for 4WD) |
![]() |
Install the rear flexible hose to the rear shock absorber with coil spring with the bolt.
| 17. INSTALL DECK SIDE TRIM |
![]() |
Engage the 3 guides and 4 claws as shown in the illustration.
![]() |
Install the deck side trim LH with the bolt.
| 18. INSTALL DECK SIDE TRIM COVER |
![]() |
Engage the 2 claws and install the deck side trim cover LH.
| 19. INSTALL REAR WHEEL |
| 20. INSPECT AND ADJUST REAR WHEEL ALIGNMENT |