FRONT SEAT OUTER BELT ASSEMBLY > REMOVAL |
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE FRONT DOOR SCUFF PLATE |
![]() |
Disengage the 8 claws and guide, and remove the front door scuff plate LH.
| 3. DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP |
| 4. REMOVE REAR DOOR SCUFF PLATE |
![]() |
Disengage the 5 claws, 3 clips and guide, and remove the rear door scuff plate LH.
| 5. DISCONNECT REAR DOOR OPENING TRIM WEATHERSTRIP |
| 6. REMOVE LOWER CENTER PILLAR GARNISH |
![]() |
Disengage the 2 claws and 2 clips, and remove the lower center pillar garnish LH.
| 7. DISCONNECT FRONT SEAT OUTER BELT ASSEMBLY |
![]() |
Remove the bolt and disconnect the floor end of the front seat outer belt assembly.
| 8. REMOVE CENTER PILLAR GARNISH |
![]() |
Remove the screw and clip.
Disengage the 2 guides and clip, and remove the center pillar garnish LH.
| 9. REMOVE FRONT SEAT OUTER BELT ASSEMBLY |
![]() |
Remove the nut and disconnect the shoulder anchor of the front seat outer belt assembly.
![]() |
Using a screwdriver, pull out the locking button in the direction shown by the arrow to release the lock, and disconnect the pretensioner connector as shown in the illustration.
![]() |
Remove the 2 bolts and front seat outer belt assembly.
| 10. REMOVE FRONT SHOULDER BELT ANCHOR ADJUSTER ASSEMBLY |
![]() |
Remove the 2 bolts and front shoulder belt anchor adjuster assembly.