Home › ENGINE › 2GR-FE FUEL › FUEL PUMP RESISTOR

FUEL PUMP RESISTOR > INSTALLATION

for Preparation Click here



1. INSTALL FUEL PUMP RESISTOR


    A175692
  1. Install the fuel pump resistor cover.



    A175691
  1. Install the fuel pump resistor with the nut.

    Torque:
    19 N*m{ 194 kgf*cm , 14 ft.*lbf }

  1. Connect the connector.



2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).



3. INSPECT SRS WARNING LIGHT
  1. Inspect the SRS warning light (Click here).