Home › CRUISE CONTROL SYSTEM › CRUISE CONTROL › CRUISE CONTROL SYSTEM

DTC    P0607    Input Signal Circuit Malfunction

for Preparation Click here


DESCRIPTION

This DTC indicates internal abnormalities of the ECM.

DTC No.
Detection Item
Trouble Area
P0607
The ECM has a supervisory CPU and control ECU inside. When each input STP signal is different for 0.15 sec. or more, this trouble code is output.
This trouble code is output after 0.4 sec. has passed from the time the cruise cancel input signal (STP input) is input into the ECM.

HINT:
When a trouble code is detected, the fail safe must be kept on until the ignition switch is turned off.

ECM

INSPECTION PROCEDURE

1.REPLACE ECM
  1. Replace the ECM (for 2GR-FE) (Click here).


NEXT

END