CERTIFICATION ECU (w/ Smart Key System) > INSTALLATION |
| 1. INSTALL CERTIFICATION ECU (SMART KEY ECU ASSEMBLY) |
![]() |
Install the certification ECU (smart key ECU assembly) with the 2 nuts.
Connect the connectors.
| 2. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY |
Connect each connector and clamp.
![]() |
Engage the 4 claws and 3 clips.
Install the lower instrument panel sub-assembly with the 2 bolts <B> and 3 screws <F>.
| 3. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY |
![]() |
Engage the 2 guides.
Engage the 3 claws and install the No. 2 instrument panel under cover sub-assembly.
| 4. INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH |
| 5. INSTALL FRONT DOOR SCUFF PLATE RH |
| 6. REGISTER ECU COMMUNICATION ID |
| 7. REGISTER KEY |