Home › BODY › SEAT › FRONT SEATBACK HEATER (for Manual Seat Type RH Side)

FRONT SEATBACK HEATER (for Manual Seat Type RH Side) > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait for 90 seconds after disconnecting the cable to prevent airbag deployment (Click here).

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).



2. REMOVE FRONT SEAT HEADREST ASSEMBLY

HINT:
Use the same procedure for the RH side and the LH side .



3. REMOVE FRONT OUTER SEAT TRACK COVER

HINT:
Use the same procedure for the RH side and the LH side .



4. REMOVE FRONT INNER SEAT TRACK COVER

HINT:
Use the same procedure for the RH side and the LH side .



5. REMOVE REAR OUTER SEAT TRACK COVER

HINT:
Use the same procedure for the RH side and the LH side .



6. REMOVE REAR INNER SEAT TRACK COVER

HINT:
Use the same procedure for the RH side and the LH side .



7. REMOVE FRONT SEAT ASSEMBLY

HINT:
Use the same procedure for the RH side and the LH side .



8. REMOVE RECLINING ADJUSTER RELEASE HANDLE


    B170886E01
  1. Lift the reclining adjuster release handle.

  1. Using a screwdriver wrapped with protective tape, disengage the claw and remove the reclining adjuster release handle as shown in the illustration.



9. REMOVE FRONT SEAT CUSHION SHIELD


    B180386
  1. Disengage the 2 hooks.



    B170913
  1. Remove the 2 screws.



    B170888
  1. Disengage the claw.

  1. Disengage the 2 guides and remove the front seat cushion shield.



10. REMOVE FRONT SEAT INNER BELT ASSEMBLY

HINT:
Use the same procedure for the RH side and the LH side .



11. REMOVE FRONT SEAT CUSHION INNER SHIELD


    B170897
  1. Remove the screw.

  1. Disengage the claw.



    B170898
  1. Disengage the guide and remove the front seat cushion inner shield as shown in the illustration.



12. REMOVE FRONT SEATBACK COVER WITH PAD
  1. Disconnect the seat heater connector.



    B175999
  1. Remove the 3 hog rings.



    B176000
  1. Remove the 5 hog rings.



    B176001
  1. Disengage the 2 hooks.



    B176002
  1. Turn back the separate type front seatback cover to remove the nut, and separate the bracket of the separate type front seatback cover.



    B172866
  1. Disengage the 4 claws and remove the 2 front seat headrest supports.

  1. Remove the front seatback cover with pad from the front seat frame assembly with adjuster.



13. REMOVE SEPARATE TYPE FRONT SEATBACK COVER


  1. Remove the 7 hog rings and the separate type front seatback cover.


    B172869E01