Home › BODY › SEAT › FRONT SEAT CUSHION HEATER (for Manual Seat Type RH Side)

FRONT SEAT CUSHION HEATER (for Manual Seat Type RH Side) > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait for 90 seconds after disconnecting the cable to prevent airbag deployment (Click here).

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).



2. REMOVE FRONT SEAT HEADREST ASSEMBLY

HINT:
Use the same procedure for the RH side and the LH side .



3. REMOVE FRONT OUTER SEAT TRACK COVER

HINT:
Use the same procedure for the RH side and the LH side .



4. REMOVE FRONT INNER SEAT TRACK COVER

HINT:
Use the same procedure for the RH side and the LH side .



5. REMOVE REAR OUTER SEAT TRACK COVER

HINT:
Use the same procedure for the RH side and the LH side .



6. REMOVE REAR INNER SEAT TRACK COVER

HINT:
Use the same procedure for the RH side and the LH side .



7. REMOVE FRONT SEAT ASSEMBLY

HINT:
Use the same procedure for the RH side and the LH side .



8. REMOVE RECLINING ADJUSTER RELEASE HANDLE


    B170886E01
  1. Lift the reclining adjuster release handle.

  1. Using a screwdriver wrapped with protective tape, disengage the claw and remove the reclining adjuster release handle RH as shown in the illustration.



9. REMOVE FRONT SEAT CUSHION SHIELD


    B180386
  1. Disengage the 2 hooks.



    B170913
  1. Remove the 2 screws.



    B170888
  1. Disengage the claw.

  1. Disengage the 2 guides and remove the front seat cushion shield.



10. REMOVE FRONT SEAT INNER BELT ASSEMBLY

HINT:
Use the same procedure for the RH side and the LH side .



11. REMOVE FRONT SEAT CUSHION INNER SHIELD


    B170897
  1. Remove the screw.

  1. Disengage the claw.



    B170898
  1. Disengage the guide and remove the front seat inner cushion shield as shown in the illustration.



12. REMOVE FRONT SEAT CUSHION COVER WITH PAD


    B174577
  1. Disengage the clamp.

  1. Disconnect the seat heater connector.



  1. Using a clip remover, remove the 2 clips.


    B174575

  1. Disengage the hooks and remove the front seat cushion cover with pad as shown in the illustration.



13. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER


    B174580
  1. Remove the 2 hog rings.



  1. Remove the 15 hog rings and the separate type front seat cushion cover.


    B174579E01