Home › BODY › SEAT › SEAT HEATER CONTROL (for Manual Seat Type RH Side)

SEAT HEATER CONTROL (for Manual Seat Type RH Side) > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait for 90 seconds after disconnecting the cable to prevent airbag deployment (Click here).

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).



2. REMOVE FRONT SEAT HEADREST ASSEMBLY

HINT:
Use the same procedure for the RH side and the LH side .



3. REMOVE FRONT OUTER SEAT TRACK COVER

HINT:
Use the same procedure for the RH side and the LH side .



4. REMOVE FRONT INNER SEAT TRACK COVER

HINT:
Use the same procedure for the RH side and the LH side .



5. REMOVE REAR OUTER SEAT TRACK COVER

HINT:
Use the same procedure for the RH side and the LH side .



6. REMOVE REAR INNER SEAT TRACK COVER

HINT:
Use the same procedure for the RH side and the LH side .



7. REMOVE FRONT SEAT ASSEMBLY

HINT:
Use the same procedure for the RH side and the LH side .



8. REMOVE SEAT HEATER CONTROL SUB-ASSEMBLY


    B176349
  1. Disconnect the 2 connectors.

  1. Disengage the 2 clamps and remove the seat heater control sub-assembly.