Home › ENGINE › 3MZ-FE COOLING › THERMOSTAT

THERMOSTAT > REMOVAL

for Preparation Click here



1. REMOVE INVERTER WITH CONVERTER ASSEMBLY

HINT:
Click here



2. REMOVE WATER INLET PIPE


    A080823
  1. Remove the bolt and the water inlet pipe.

  1. Remove the O-ring from the water inlet pipe.



3. REMOVE WATER INLET


    A080824
  1. Disconnect the wire harness clamp.

  1. Remove the 3 nuts and the water inlet.



4. REMOVE THERMOSTAT
  1. Remove the thermostat.

  1. Remove the gasket from the thermostat.