WATER PUMP > REMOVAL |
| 1. REMOVE TIMING BELT |
| 2. REMOVE NO. 1 TIMING BELT IDLER SUB-ASSEMBLY |
Using a 10 mm socket hexagon wrench, remove the pivot bolt, timing belt idler No. 1 and distributor drive gear plate washer.
| 3. REMOVE NO. 2 TIMING BELT IDLER SUB-ASSEMBLY |
Remove the bolt and No. 2 timing belt idler sub-assembly.
| 4. REMOVE CAMSHAFT TIMING PULLEY |
![]() |
Using SST, remove the bolt and the RH timing pulley.
![]() |
Using SST, remove the bolt and the LH timing pulley.
| 5. REMOVE NO. 3 TIMING BELT COVER |
![]() |
Remove the 6 bolts and No. 3 timing belt cover.
Remove the 6 collars and 6 bushings from the No. 3 timing belt cover.
| 6. REMOVE WATER PUMP ASSEMBLY |
![]() |
Remove the 3 bolts and 3 nuts, then remove the water pump and the gasket.