SEAT POSITION SENSOR > REMOVAL |
| 1. PRECAUTION |
| 2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL (for Manual Seat) |
| 3. REMOVE FRONT SEAT HEADREST ASSEMBLY LH (for Manual Seat) |
![]() |
Press the headrest support button and pull up the headrest to its highest position as shown in the illustration.
![]() |
Insert a finger or screwdriver into the hole to release the lock. Pull the headrest up as shown in the illustration to remove it.
| 4. REMOVE FRONT OUTER SEAT TRACK COVER LH (for Manual Seat) |
Lift up the seat track adjusting handle and move the seat to the rearmost position.
![]() |
Disengage the 2 claws and remove the front outer seat track cover.
| 5. REMOVE FRONT INNER SEAT TRACK COVER LH (for Manual Seat) |
![]() |
Disengage the 2 claws and remove the front inner seat track cover.
| 6. REMOVE REAR SEAT TRACK COVER LH (for Manual Seat) |
Lift up the seat track adjusting handle and move the seat to the foremost position.
![]() |
Disengage the 4 claws and remove the 2 rear seat track covers.
| 7. REMOVE FRONT SEAT ASSEMBLY LH (for Manual Seat) |
![]() |
Remove the 2 bolts on the rear side of the seat.
Lift up the seat track adjusting handle and move the seat to the rearmost position.
![]() |
Remove the 2 bolts on the front side of the seat.
Lift up the seat track adjusting handle and move the seat to the center position. Also, operate the reclining adjuster release handle and move the seatback to the upright position.
Disconnect the connectors under the front seat assembly.
Remove the front seat assembly.
| 8. REMOVE FRONT SEAT HEADREST ASSEMBLY LH (for Power Seat) |
![]() |
Press the headrest support button and pull up the headrest to its highest position as shown in the illustration.
![]() |
Insert a finger or screwdriver into the hole to release the lock. Pull the headrest up as shown in the illustration to remove it.
| 9. REMOVE FRONT OUTER SEAT TRACK COVER LH (for Power Seat) |
Operate the power seat switch knob and move the seat to the rearmost position.
![]() |
Disengage the 2 claws and remove the front outer seat track cover.
| 10. REMOVE FRONT INNER SEAT TRACK COVER LH (for Power Seat) |
![]() |
Disengage the 2 claws and remove the front inner seat track cover.
| 11. REMOVE REAR OUTER SEAT TRACK COVER LH (for Power Seat) |
Operate the power seat switch knob and move the seat to the foremost position.
![]() |
Disengage the 2 claws and remove the rear outer seat track cover.
| 12. REMOVE REAR INNER SEAT TRACK COVER LH (for Power Seat) |
![]() |
Disengage the 2 claws and remove the rear inner seat track cover.
| 13. REMOVE FRONT SEAT ASSEMBLY LH (for Power Seat) |
![]() |
Remove the 2 bolts on the rear side of the seat.
Operate the power seat switch knob and move the seat to the rearmost position.
![]() |
Remove the 2 bolts on the front side of the seat.
Operate the power seat switch knob and move the seat to the center position. Also, operate the power seat switch knob and move the seatback to the upright position.
Disconnect the cable from the negative (-) battery terminal.
Disconnect each connector under the front seat assembly.
Remove the front seat assembly.
| 14. REMOVE SEAT POSITION SENSOR |
![]() |
Disconnect the connector.
Using a "TORX" socket wrench (T30), remove the "TORX" screw and seat position sensor with the seat slide position sensor protector.
![]() |
Remove the seat position sensor from the seat slide position sensor protector as shown in the illustration.