SMART KEY SYSTEM > SYSTEM DESCRIPTION |
| SMART KEY SYSTEM DESCRIPTION |
In addition to conventional mechanical key and wireless door lock control functions, the smart key system enables door locking/unlocking, steering lock releasing, engine starting, and back door and glass hatch opening without operating the electrical key. The only requirement is that the electrical key is in the user's possession.
| DETECTION AREA |

Precautions for the entire system:
| FUNCTION OF MAIN COMPONENTS |
| Component | Function |
| Electrical Key | Consists of mechanical key, transmitter for wireless door lock control, and transceiver for smart key system |
| Certification ECU (Smart Key ECU Assembly) | Controls smart key system in accordance with signals from each oscillator, various switches, ECUs, and electrical key
|
| Main Body ECU (Instrument panel junction block) | Controls push button start function in accordance with signals from various switches, ECUs, and combination meter
|
| ID code box (Immobiliser Code ECU) | Receives steering unlock or engine immobiliser unset signals from certification ECU (smart key ECU assembly), certifies them, and transmits unset signals to steering lock ECU or ECM |
| Door Outside Handle (driver door and passenger door) (antenna) | Transmits request signals |
| Door Outside Handle (driver door and passenger door) (touch sensor) | Detects that person touches inside of door outside handle |
| Door Outside Handle (driver door and passenger door) (lock switch) | Transmits door lock request signals to certification ECU (smart key ECU assembly) |
| Door Electrical Key Oscillator (driver door and passenger door) | Receives request signal from certification ECU (smart key ECU assembly), and forms detection area around front door |
| Indoor Electrical Key Oscillator (front, center and rear) | Receives request signal from certification ECU (smart key ECU assembly), and forms detection area in vehicle interior |
| Outside Electrical Key Oscillator (back door) | Receives request signal from certification ECU (smart key ECU assembly), and forms detection area around back door |
| Door Control Receiver | Receives ID code from electrical key in detection area and transmits it to certification ECU (smart key ECU assembly) |
| Glass Hatch Opener Switch | Transmits a glass hatch open request signal to the main body ECU (instrument panel junction block) |
| Back Door Opener Switch | Transmits a back door open request signal to the main body ECU (instrument panel junction block) |
| Back Door Lock Switch | Transmits a back door lock request signal to the certification ECU (smart key ECU assembly) |
| When certification ECU (smart key ECU assembly) detects conditions such as listed below, it warns driver by sounding wireless door lock buzzer, displaying information in multi-information display and sounding a buzzer in combination meter in accordance with request signal from ECU Example:
|
| CONSTRUCTION AND OPERATION |
Electrical Key
The electrical key consists of a mechanical key, a transmitter for the wireless door lock control, and a transceiver for the smart key system.

Oscillator (door electrical key oscillators, front, center and rear indoor electrical key oscillators, back door outside electrical key oscillator)
Each oscillator transmits the request signal received from the certification ECU (smart key ECU assembly), and forms an electrical key detection area to detect the presence of an electrical key. The detection area formed by the door electrical key oscillator and back door outside electrical key oscillator is approximately 0.7 to 1.0 m (2.3 to 3.3 ft.) from the door outside handle of the door or the center of the rear bumper.
| ENTRY FUNCTION OPERATION |
The smart key system has the following functions:
| Function | Outline |
| Mechanical Key | Operation is same as conventional mechanical key. |
| Wireless Door Lock Control | This function remotely locks and unlocks all doors or back door. Operation is same as wireless door lock control system. However, receiver in certification ECU (smart key ECU assembly) uses entry door control receiver to control locking and unlocking. |
| Entry Illumination | When person carrying electrical key enters detection area, door will enter unlock standby mode and front map light and foot light will illuminate. |
| Entry Unlock | When electrical key is located in detection area of door electrical key oscillator, door will unlock by touching inside of door outside handle. |
| Entry Lock | When electrical key is located in detection area of door electrical key oscillator and power switch is off, door can be locked by pressing lock switch on door outside handle. |
| Entry Back Door Open | When a key is in an exterior actuation area of the outside electrical key oscillator (back door), the back door opens manually by simply pressing the back door opener switch. |
| Entry Glass Hatch Open | When a key is in an exterior actuation area of the outside electrical key oscillator (back door), the back door glass opens manually by simply pressing the glass hatch opener switch. |
| Electrical Key Lock-in Prevention |
|
| Warning | When any of situations below occur, smart key system causes certification ECU (smart key ECU assembly) to sound buzzer in combination meter and wireless door lock buzzer, and display information in order to alert driver.
|
| Battery Saving | If electrical key is constantly located within actuation area of door electrical key oscillator, system maintains periodic communication with electrical key. Therefore, if vehicle remains parked in that state for a long time, electrical key battery and vehicle battery could be drained. |
| Key Cancel (Click here) | Following electrical key functions can be cancelled by performing certain operations:
|
| Electrical Key Code Registration | The total number of electrical keys that can be registered is seven. Enables the registration (writing and storing) of transmitter recognition codes in the EEPROM that is contained in the certification ECU (smart key ECU assembly). |
| WIRELESS DOOR LOCK AND UNLOCK AND POWER BACK DOOR OPEN*1 FUNCTION |
| ENTRY UNLOCK FUNCTION |
The detection area is formed by communication between a door electrical key oscillator and door control receiver when the door is locked in order to detect access of the person carrying the electrical key.
When the person carrying the electrical key enters the detection area around the vehicle, the matching of the ID codes for a door electrical key oscillator and electrical key will automatically be performed. After the matching is completed, the door will enter unlock standby mode.
In unlock standby mode, the antenna built into the door outside handle starts sensing. If the door outside handle is held (the back side of the door outside handle is touched), the door unlock operation will be performed. At this time, the hazard warning light blinks twice and the wireless door lock buzzer sounds twice.
If any of the doors are not opened after a door unlock operation, all doors will automatically lock after 30 seconds.
| ENTRY LOCK FUNCTION |
After leaving the vehicle carrying the electrical key, push the lock switch on the door outside handle and back door opener switch when all the doors are closed.
The certification ECU (smart key ECU assembly) determines whether the electrical key is located inside or outside the cabin based on the information from a door electrical key oscillator and room oscillator. Then matching of the ID codes is performed.
When the matching result shows that the ID codes of the electrical key and indoor antenna do not match and the ID codes of the electrical key and door electrical key oscillator match, the door lock function will operate. At this time, the hazard warning lights blink once and the wireless door lock buzzer sounds once.
If the electrical key is located inside the cabin, the door lock function will not operate and the alarm buzzer (beep sound) will sound for 2 seconds.
| ENTRY BACK DOOR OPEN FUNCTION |
| ENTRY GLASS HATCH OPEN FUNCTION |
| ELECTRICAL KEY LOCK-IN PREVENTION FUNCTION |
If you attempt to lock the door through keyless operation (turn the lock knob to LOCK and then close the door) with the electrical key in the cabin, the system determines that the electrical key is located in the cabin and unlocks the door.
If the glass hatch is closed with the electrical key in the luggage compartment, the alarm will sound and the glass hatch can be opened only when all the doors are locked in order to prevent electrical key confinement in the vehicle.
| WARNING FUNCTION |
General
When any of the situations below occur, the smart key system causes the certification ECU (smart key ECU assembly) to sound the buzzer in the combination meter and the wireless door lock buzzer, and illuminate the combination meter's multi-information display in order to alert the driver.
| Warning Function Operation Condition | Situation |
| Exit warning if shift lever position is not P and power source mode is not off. | A |
| Exit warning if shift lever position is P and power source mode is not off. | B |
| An occupant leaves with the electrical key. | C |
| The power switch is operated while the electrical key is outside the detection area. | D |
| Entry lock is operated while the electrical key is inside the cabin. | E |
| The electrical key battery is weak. | F |
| The electrical key is left in the vehicle. | G |
| A door is ajar. | H |
| Glass hatch is closed while the electrical key is in cabin. | I |
| Steering lock is not released. | J |
| The steering lock mechanism is malfunctioning. | K |
| The main body ECU (instrument panel junction block) is malfunctioning. | L |
| An engine start method is displayed. | M |
Situation A
There are 2 patterns for situation A.
Pattern 1: A door is opened and the user tries to leave the vehicle.
Pattern 2: Then the user holds the electrical key and tries to move away from the vehicle.
In these situations, the following control is performed:
| Possible Effects without Warning | Sudden vehicle start, vehicle theft, vehicle roll-away |
| Warning Condition | The certification ECU (smart key ECU assembly) gives warning when all of the following conditions are satisfied:
|
Combination Meter
| Warning: Sounds continuously |
| Multi-information Display | Warning: The following message is displayed on the combination meter:
|
| Wireless Door Lock Buzzer | - |
| Warning Stop Condition | The warning is stopped when one of the following conditions is met:
|
| Possible Effects without Warning | Sudden vehicle start, vehicle theft, vehicle roll-away |
| Warning Condition | The certification ECU (smart key ECU assembly) gives warning when all of the following conditions are satisfied:
|
Combination Meter
| Warning: Sounds continuously The warning is stopped when one of the following conditions is met:
|
| Multi-information Display | Warning: The following messages are displayed alternately on the combination meter:
|
| Wireless Door Lock Buzzer | Warning: Sounds continuously The warning is stopped when one of the following conditions is met:
|
Situation B
There are 2 patterns for situation B.
Pattern 1: A door is opened and the user tries to leave the vehicle. Then the user holds the electrical key and tries to move away from the vehicle.
Pattern 2: Then the user tries to use the entry lock and presses the lock switch.
In these situations, the following control is performed:
| Possible Effects without Warning | Vehicle theft, engine cannot be restarted |
| Warning Condition | The certification ECU (smart key ECU assembly) gives warning when all of the following conditions are satisfied:
|
Combination Meter
| Warning: Sounds once |
| Multi-information Display | Warning: The following message is displayed on the combination meter:
|
| Wireless Door Lock Buzzer | Warning: Sounds 3 times The warning is stopped when either of the following conditions is met:
|
| Possible Effects without Warning | Vehicle theft |
| Warning Condition | The certification ECU (smart key ECU assembly) gives warning when all of the following conditions are satisfied:
|
Combination Meter
| - |
| Multi-information Display | - |
| Wireless Door Lock Buzzer | Warning: Sounds for 60 seconds The warning is stopped when one of the following conditions is met:
|
Situation C
In this situation, the following control is performed:
| Possible Effects without Warning | Engine cannot be restarted |
| Warning Condition | The certification ECU (smart key ECU assembly) gives warning when all of the following conditions are satisfied:
|
Combination Meter
| Warning: Sounds once |
| Multi-information Display | Warning: The following message is displayed on the combination meter:
|
| Wireless Door Lock Buzzer | Warning: Sounds 3 times The warning is stopped when one of the following conditions is met:
|
Situation D
In this situation, the following control is performed:
| Possible Effects without Warning | Confuses the user |
| Warning Condition | The certification ECU (smart key ECU assembly) gives warning when both of the following conditions are satisfied:
|
Combination Meter
| Warning: Sounds once |
| Multi-information Display | Warning: The following message is displayed on the combination meter for 8 seconds (disappears after 8 seconds):
|
| Wireless Door Lock Buzzer | - |
Situation E
In this situation, the following control is performed:
| Possible Effects without Warning | Vehicle theft |
| Warning Condition | The certification ECU (smart key ECU assembly) gives warning when all of the following conditions are satisfied:
|
Combination Meter
| - |
| Multi-information Display | - |
| Wireless Door Lock Buzzer | Warning: Sounds for 2 seconds |
Situation F
In this situation, the following control is performed:
| Possible Effects without Warning | Smart key system does not function |
| Warning Condition | The certification ECU (smart key ECU assembly) gives warning when all of the following conditions are satisfied:
|
Combination Meter
| Warning: Sounds once |
| Multi-information Display | Warning: The following message is displayed on the combination meter for 5 seconds (disappears after 5 seconds):
|
| Wireless Door Lock Buzzer | - |
Situation G
There are two patterns for situation G.
| Possible Effects without Warning | Vehicle theft |
| Warning Condition | The warning is activated when either of the following conditions is met:
|
Combination Meter
| Warning: Continues to sound at short and even intervals |
| Multi-information Display | - |
| Wireless Door Lock Buzzer | - |
| Power switch Indicator Light | - |
| Warning Stop Condition | The warning is stopped when one of the following conditions is met:
|
Situation H
The lock switch on the door outside handle is pressed to perform entry lock with a door open. In this situation, the following control is performed:
| Possible Effects without Warning | Vehicle theft |
| Warning Condition | The warning is activated when all of the following conditions are met:
|
Combination Meter
| - |
| Multi-information Display | - |
| Wireless Door Lock Buzzer | Warning: Sounds continuously |
| Power switch Indicator Light | - |
| Warning Stop Condition | The warning is stopped when one of the following conditions is met:
|
Situation I
The glass hatch door is closed with the electrical key left in the luggage compartment. In this situation, the following control is performed:
| Possible Effects without Warning | Vehicle theft |
| Warning Condition | The warning is activated when all of the following conditions are met:
|
Combination Meter
| - |
| Multi-information Display | - |
| Wireless Door Lock Buzzer | Warning: Sounds for 2 seconds |
| Warning Stop Condition | - |
Situation J
The steering lock cannot be released. In this situation, the following control is performed:
| Possible Effects without Warning | Vehicle theft |
| Warning Condition | The steering lock cannot be released, thus the engine is prevented from starting. |
Combination Meter
| - |
| Multi-information Display | Warning: The following message is displayed on the combination meter for 15 seconds (disappears after 15 seconds):
|
Combination Meter
| Warning: Flashes |
| Wireless Door Lock Buzzer | - |
| Power switch Indicator Light | Warning: The indicator blinks in green at 1-second intervals (goes off automatically in 15 seconds). |
| Warning Stop Condition | The power switch is pressed while the steering wheel is turned left and right, and the steering lock is successfully released. |
Situation K
A malfunction of the steering lock ECU is detected. In this situation, the following control is performed:
| Possible Effects without Warning | Vehicle theft |
| Warning Condition | A malfunction of the steering lock ECU is detected. |
Combination Meter
| - |
| Multi-information Display | Warning: The following message is displayed on the combination meter:
|
Combination Meter
| Warning: Flashes |
| Wireless Door Lock Buzzer | - |
| Power switch Indicator Light | Warning: The indicator blinks in amber at 2-second intervals. |
| Warning Stop Condition | The steering lock ECU returns to normal. |
Situation L
A malfunction of the main body ECU (instrument panel junction block) is detected. In this situation, the following control is performed:
| Possible Effects without Warning | Vehicle theft |
| Warning Condition | A malfunction in the main body ECU (instrument panel junction block) is detected. |
Combination Meter
| - |
| Multi-information Display | - |
Combination Meter
| - |
| Wireless Door Lock Buzzer | - |
| Power switch Indicator Light | Warning: The indicator blinks in amber at 2-second intervals. |
| Warning Stop Condition | The main body ECU (instrument panel junction block) returns to normal. |
Situation M
A warning message appears on the meter when the driver does not follow the proper procedure to start the vehicle.
In this situation, the following control is performed:
| Possible Effects without Warning | Vehicle theft |
| Warning Condition | The warning is activated when all of the following conditions are met:
|
Combination Meter
| - |
| Multi-information Display | Warning: The following message is displayed on the combination meter:
|
Combination Meter
| - |
| Wireless Door Lock Buzzer | - |
| Power switch Indicator Light | - |
| Warning Stop Condition | The warning is stopped when either of the following conditions is met:
|
| BATTERY SAVING |
Vehicle Battery Saving Function
In the smart key system, signals are emitted outside the vehicle at a prescribed interval (0.25 seconds) when the doors are locked. Therefore, the vehicle battery could be discharged if the vehicle remains parked for a long time. For this reason, the controls listed below are carried out:
| Condition | Control |
Both conditions below are met for 5 days:
| Signal transmission interval is extended from 0.25 to 0.75 seconds. |
Both conditions below are met for 14 days:
| Automatically deactivates the smart key system |
Electrical Key Battery and Vehicle Battery Saving Function
In the smart key system, if the electrical key is constantly located within the vehicle exterior detection area of the doors, the system maintains periodic communication with the electrical key. Therefore, if the vehicle remains parked in that state for a long time, the electrical key battery and the vehicle battery could be discharged. For this reason, if this state continues longer than 10 minutes, the smart key system automatically becomes deactivated.
Reinstatement Conditions