DTC P0A94-545 DC / DC Converter Performance |
DTC P0A94-546 DC / DC Converter Performance |
| DTC No. | INF Code | DTC Detection Condition | Trouble Area |
| P0A94 | 545 | Open or short to GND in boost converter overvoltage (OVL) signal line | Inverter with converter assembly |
| 546 | Short to +B in boost converter overvoltage (OVL) signal line |
| Related DTCs | P0A94 (INF 545): Boost converter / OVL malfunction (short to GND and disconnection) P0A94 (INF 546): Boost converter / OVL malfunction (short to GND +B) |
| Required sensors / components | Boost converter |
| Frequency of operation | Continuous |
| Duration | TMC's intellectual property |
| MIL operation | 1 driving cycle |
| Sequence of operation | None |
| The monitor will run whenever the DTCs listed are not present | TMC's intellectual property |
| Other conditions belong to TMC's intellectual property | - |
| Boost converter overvoltage (OVL) signal circuit | Open or short |
| Boost converter | DTC P0A94 (INF 545/546) is not detected |
| 1.CHECK CONNECTOR CONNECTION CONDITION (MG ECU CONNECTOR) |
Turn the power switch off.
Remove the service plug grip (Click here).
Remove the inverter cover (Click here).
![]() |
Check the connections of the MG ECU connectors.
|
| ||||
| OK | ||
| ||