SMART KEY SYSTEM > PRECAUTION |
| 1.NOTICE FOR INITIALIZATION |
| System Name | See Procedure |
| Power Back Door System |
Click here
|
| SFI System |
| 2.PRECAUTIONS FOR PUSH-BUTTON START FUNCTION: |
Before starting the hybrid control system, firmly depress the brake pedal until the indicator in the power switch turns green.
The power source mode (off, on (ACC), on (IG)) is always retained in memory by the vehicle. If the battery is disconnected, the power source mode that was present before disconnection will be restored after the battery is reconnected. Be sure to turn the power switch off before disconnecting the cable from the negative battery terminal. Be careful if the power source mode of a vehicle with a discharged battery is not known.
After the battery is reconnected, be sure to wait 10 seconds or more before attempting to start the hybrid control system. The hybrid control system may not start immediately after the battery is reconnected.
If the electrical key is held near the power switch to start the engine when the electrical key battery is depleted, the following warnings will sound:
Driver's door open → closed
Doors other than the driver door open → closed