Home › ENGINE › 3MZ-FE ENGINE MECHANICAL › REAR CRANKSHAFT OIL SEAL

REAR CRANKSHAFT OIL SEAL > REMOVAL

for Preparation Click here



1. REMOVE HYBRID VEHICLE TRANSAXLE ASSEMBLY

HINT:
Click here.



2. REMOVE TRANSMISSION INPUT DAMPER ASSEMBLY


    A109808E01
  1. Using SST, hold the crankshaft.

    SST
    09213-54015   (91651-60855)
    09330-00021  



    A108131
  1. Remove the 6 bolts and transmission input damper from the flywheel.



3. REMOVE FLYWHEEL SUB-ASSEMBLY


    A109808E01
  1. Using SST, hold the crankshaft.

    SST
    09213-54015   (91651-60855)
    09330-00021  



    A108132
  1. Remove the 8 bolts and flywheel.



4. REMOVE REAR ENGINE OIL SEAL


    A178011E01
  1. Using a knife, cut off the oil seal lip.

  1. Using a screwdriver with its tip taped, pry out the oil seal.

    NOTICE:
    After the removal, check that the crankshaft is not damaged. If it is damaged, smooth the surface with 400-grit sandpaper.