Home › ENGINE › 3MZ-FE ENGINE CONTROL SYSTEM › AIR FUEL RATIO SENSOR

AIR FUEL RATIO SENSOR > REMOVAL

for Preparation Click here



1. REMOVE AIR FUEL RATIO SENSOR (for Bank 2)
  1. Disconnect the air fuel ratio sensor connector and clamp.



    A173498E01
  1. Using SST, remove the air fuel ratio sensor from the exhaust manifold sub-assembly LH.

    SST
    09224-00010  

    NOTICE:
    Do not damage the air fuel ratio sensor.



2. REMOVE EXHAUST MANIFOLD SUB-ASSEMBLY RH

HINT:
Click here.



3. REMOVE AIR FUEL RATIO SENSOR (for Bank 1)
  1. Disconnect the air fuel ratio sensor connector and clamp.



    A173500E01
  1. Using SST, remove the air fuel ratio sensor from the exhaust manifold converter sub-assembly RH.

    SST
    09224-00010  

    NOTICE:
    Do not damage the air fuel ratio sensor.