Home › HYBRID SYSTEM ยท P310 › HYBRID VEHICLE CONTROL › HYBRID CONTROL SYSTEM

DTC    P3000-603    HV Battery Malfunction

for Preparation Click here


DESCRIPTION

The hybrid vehicle control ECU monitors its internal operation and detects the following malfunction.

DTC No.
INF Code
DTC Detection Condition
Trouble Area
P3000
603
An HV battery cooling system error signal is detected in the hybrid vehicle control ECU.
  1. Hybrid vehicle control ECU
  2. HV battery

INSPECTION PROCEDURE

1.CHECK DTC OUTPUT (HV)
  1. Connect the Techstream to the DLC3.

  1. Turn the power switch on (IG).

  1. Select the following menu items: Powertrain / Hybrid Control / Trouble Codes.

  1. Check if DTCs are output.

    Result:
    Result
    Proceed to
    P3000-603 only is output.
    A
    DTCs other than P3000-603 are also output.
    B



B
GO TO DTC CHART (Click here)
A


2.REPLACE HYBRID VEHICLE CONTROL ECU
  1. Replace the hybrid vehicle control ECU (Click here).

    HINT:
    If DTC P3000-603 is output, replace the HV battery. This code indicates that an HV battery cooling system problem exists, and this problem will result in deterioration of the battery due to high temperatures.


NEXT

REPLACE HV BATTERY (Click here)