Home › ENGINE › 3MZ-FE ENGINE CONTROL SYSTEM › SFI SYSTEM

DTC    U0293    Lost Communication with HV ECU

for Preparation Click here


DESCRIPTION

The Controller Area Network (CAN) is a serial data communication system for real-time application. It is a multiplex communication system designed for on-vehicle use that provides a superior communication speed of 500 kbps and a capability to detect malfunctions. Through the combination of the CANH and CANL bus lines, the CAN is able to maintain communication based on differential voltage.

DTC No.
DTC Detecting Condition
Trouble Area
U0293
When communication with hybrid vehicle control ECU is interrupted
(1 trip detection logic)
  1. Wire harness
  2. Hybrid vehicle control ECU

MONITOR STRATEGY


Related DTCs
U0001: Lost communication with hybrid vehicle control ECU
Required Sensors/Components (Main)
ECM (included in the hybrid vehicle control ECU)
Frequency of Operation
Continuous
Duration
0.68 seconds
MIL Operation
Immediate
Sequence of Operation
None

TYPICAL ENABLING CONDITIONS


Monitor runs whenever following DTCs are not present
None
Battery voltage
10.5 V or more (0.5 seconds or more)
Power switch
ON

TYPICAL MALFUNCTION THRESHOLDS


Communication signal
No signal from hybrid vehicle control ECU

INSPECTION PROCEDURE

Refer to CAN communication system (Click here).