AXLE SYSTEM > HOW TO PROCEED WITH TROUBLESHOOTING |
| 1.VEHICLE BROUGHT TO WORKSHOP |
| |||||
| 2.CUSTOMER PROBLEM ANALYSIS |
Confirm problem symptoms.
| |||||
| 3.CHECK CAN COMMUNICATION SYSTEM * |
Check for DTCs (Click here).
| Result | Proceed to |
| DTC is not output | A |
| DTC is output | B |
|
| ||||
| |||||
| 4.CHECK HYBRID CONTROL SYSTEM DTC * |
Check for DTCs (Click here).
Record the DTCs.
Clear the DTCs (Click here).
Recheck for DTCs.
Simulate the malfunction and check if the DTCs are output again (Click here).
| Result | Proceed to |
| DTC is not output | A |
| DTC is output | B |
|
| ||||
| |||||
| 5.CHECK ELECTRONICALLY CONTROLLED BRAKE SYSTEM DTC * |
Check for DTCs (Click here).
Record the DTCs.
Clear the DTCs (Click here).
Recheck for DTCs.
Simulate the malfunction and check if the DTCs are output again (Click here).
| Result | Proceed to |
| DTC is output | A |
| DTC is not output | B |
| DTCs are not output, and the malfunction cannot be simulated or checked | C |
|
| ||||
|
| ||||
| |||||
| 6.DIAGNOSTIC TROUBLE CODE CHART |
| Reault | Proceed to |
| C1348 is output |
Click here
|
| Other than C1348 is output |
Click here
|
|
| ||||
|---|---|---|---|---|---|
| 7.PROBLEM SYMPTOMS TABLE |
| |||||
| 8.CIRCUIT INSPECTION |
| |||||
| 9.REPAIR |
| |||||
| 10.CONFIRMATION TEST |
|
| ||||
|---|---|---|---|---|---|