Home › HYBRID SYSTEM ยท P310 › HYBRID VEHICLE CONTROL › HYBRID CONTROL SYSTEM

DTC    P0A1D-141    Hybrid Powertrain Control Module

for Preparation Click here


DESCRIPTION

The hybrid vehicle control ECU monitors its internal operation, it will set a DTC and perform fail-safe control when it detects the following malfunction. If the following DTC is output, replace the hybrid vehicle control ECU.

DTC No.
INF Code
DTC Detection Condition
Trouble Area
P0A1D
141
ECU internal error
Hybrid vehicle control ECU

MONITOR DESCRIPTION

The hybrid vehicle control ECU performs many diagnostic tests to verify proper operation of internal ECU systems. One of these tests checks for errors in the ROM (Read Only Memory) circuits of the hybrid vehicle control ECU. If the hybrid vehicle control ECU detects this malfunction, it will illuminate the MIL and set a DTC.

MONITOR STRATEGY


Related DTCs
P0A1D (INF 141): ROM destruction
Required sensors / components
Hybrid vehicle control ECU
Frequency of operation
Continuous
Duration
TMC's intellectual property
MIL operation
1 driving cycle
Sequence of operation
None

TYPICAL ENABLING CONDITIONS


The monitor will run whenever the following DTCs are not present
TMC's intellectual property
Other conditions belong to TMC's intellectual property
-

TYPICAL MALFUNCTION THRESHOLDS


TMC's intellectual property
-

COMPONENT OPERATING RANGE


Hybrid vehicle control ECU
DTC P0A1D (INF 141) is not detected

INSPECTION PROCEDURE

1.REPLACE HYBRID VEHICLE CONTROL ECU
  1. Replace the hybrid vehicle control ECU (Click here).


NEXT

COMPLETED