Home › HYBRID SYSTEM ยท P310 › HYBRID VEHICLE CONTROL › HYBRID CONTROL SYSTEM

DTC    P0A1D-187    Hybrid Powertrain Control Module

for Preparation Click here


DESCRIPTION

The hybrid vehicle control ECU monitors its internal operation, it will set a DTC and perform fail-safe control when it detects the following malfunction. If the following DTC is output, replace the hybrid vehicle control ECU.

DTC No.
INF Code
DTC Detection Condition
Trouble Area
P0A1D
187
ECU internal error
Hybrid vehicle control ECU

MONITOR DESCRIPTION

The hybrid vehicle control ECU performs diagnostic tests to verify proper operation of internal and external ECU systems. In one of these tests, the hybrid vehicle control ECU monitors specific RAM circuits of the hybrid vehicle control ECU. If the hybrid vehicle control ECU detects an error in the RAM circuits, it will conclude that there is an internal malfunction in the hybrid vehicle control ECU. The hybrid vehicle control ECU will illuminate the MIL and set a DTC.

MONITOR STRATEGY


Related DTCs
P0A1D (INF 187): Important RAM error
Required sensors / components
Hybrid vehicle control ECU
Frequency of operation
Continuous
Duration
TMC's intellectual property
MIL operation
1 driving cycle
Sequence of operation
None

TYPICAL ENABLING CONDITIONS


The monitor will run whenever the following DTCs are not present
TMC's intellectual property
Other conditions belong to TMC's intellectual property
-

TYPICAL MALFUNCTION THRESHOLDS


TMC's intellectual property
-

COMPONENT OPERATING RANGE


Hybrid vehicle control ECU
DTC P0A1D (INF 187) is not detected

INSPECTION PROCEDURE

1.REPLACE HYBRID VEHICLE CONTROL ECU
  1. Replace the hybrid vehicle control ECU (Click here).


NEXT

COMPLETED