Home › HYBRID SYSTEM ยท P310 › HYBRID VEHICLE CONTROL › HYBRID CONTROL SYSTEM

DTC    P0A1D-721    Hybrid Powertrain Control Module

DTC    P0A1D-722    Hybrid Powertrain Control Module

DTC    P0A1D-723    Hybrid Powertrain Control Module

DTC    P0A1D-724    Hybrid Powertrain Control Module

DTC    P0A1D-787    Hybrid Powertrain Control Module

for Preparation Click here


DESCRIPTION

The hybrid vehicle control ECU monitors its internal operation, it will set DTCs and perform fail-safe control when it detects the following malfunctions. If any of the following DTCs are output, replace the hybrid vehicle control ECU.

DTC No.
INF Code
DTC Detection Condition
Trouble Area
P0A1D
721
ECU internal error
Hybrid vehicle control ECU
722
ECU internal error
723
ECU internal error
724
ECU internal error
787
ECU internal error

MONITOR DESCRIPTION

The hybrid vehicle control ECU performs many diagnostic tests to verify proper operation of internal ECU systems. In one of these tests, the hybrid vehicle control ECU checks the result of the ECM self-test. If the hybrid vehicle control ECU detects a "Fail" from the ECM self-test, it will conclude that there is an internal malfunction in the ECM. The hybrid vehicle control ECU will illuminate the MIL and set a DTC.

MONITOR STRATEGY


Related DTCs
P0A1D (INF 721/722/723/724/787): Engine CPU malfunction (RES CPU)
Required sensors / components
Hybrid vehicle control ECU
Frequency of operation
Continuous
Duration
TMC's intellectual property
MIL operation
1 driving cycle
Sequence of operation
None

TYPICAL ENABLING CONDITIONS


The monitor will run whenever the following DTCs are not present
TMC's intellectual property
Other conditions belong to TMC's intellectual property
-

TYPICAL MALFUNCTION THRESHOLDS


TMC's intellectual property
-

COMPONENT OPERATING RANGE


Hybrid vehicle control ECU
DTC P0A1D (INF 721/722/723/724/787) is not detected

INSPECTION PROCEDURE

1.REPLACE HYBRID VEHICLE CONTROL ECU
  1. Replace the hybrid vehicle control ECU (Click here).


NEXT

COMPLETED