Home › SUSPENSION & AXLE › SUSPENSION › FRONT SUSPENSION MEMBER

FRONT SUSPENSION MEMBER > REMOVAL

for Preparation Click here



1. REMOVE ENGINE ASSEMBLY WITH TRANSAXLE

HINT:
Remove the engine assembly with transaxle (Click here).



2. REMOVE NO. 1 FRONT STABILIZER BRACKET LH


    C167140
  1. Remove the 2 bolts and the No. 1 front stabilizer bracket LH from the front frame assembly.



3. REMOVE NO. 1 FRONT STABILIZER BRACKET RH

HINT:
Perform the same procedure as the LH side.



4. REMOVE FRONT STABILIZER BAR WITH FRONT STABILIZER LINK ASSEMBLY


5. REMOVE POWER STEERING LINK ASSEMBLY


    C174974
  1. Remove the 2 bolts, 2 nuts, and power steering link assembly.

    NOTICE:
    Because the nut has its own stopper, do not turn the nut. Loosen the bolt with the nut secured.



6. REMOVE ENGINE MOUNTING ABSORBER SUB-ASSEMBLY


    A175946
  1. Remove the 2 bolts, 2 nuts and engine mounting absorber sub-assembly.



7. SEPARATE REAR ENGINE MOUNTING INSULATOR


    C179023
  1. Remove the 2 bolts and separate the rear engine mounting insulator.



8. REMOVE FRONT FRAME ASSEMBLY


  1. Remove the 5 hole plugs.


    A172972E01



  1. Remove the 9 nuts and separate the engine with transaxle from the front frame assembly.


    A172973E01



9. REMOVE REAR ENGINE MOUNTING INSULATOR


    A171843
  1. Remove the 2 hole plugs.



    A171844
  1. Remove the 2 nuts and rear engine mounting insulator.



10. REMOVE FRONT LOWER SUSPENSION ARM LH


    C167143
  1. Remove the 3 bolts, nut, and the front lower suspension arm from the front frame assembly.

  1. Remove the front lower arm bushing stopper from the front lower suspension arm.



11. REMOVE FRONT LOWER SUSPENSION ARM RH

HINT:
Perform the same procedure as the LH side.



12. REMOVE FRONT SUSPENSION MEMBER DYNAMIC DAMPER


    C175028
  1. Remove the 2 bolts and front suspension member dynamic damper.



13. REMOVE NO. 2 FRAME CROSSMEMBER DYNAMIC DAMPER


    C194052E01
  1. Remove the 2 bolts and No. 2 frame crossmember dynamic damper.



14. REMOVE FRONT SUSPENSION MEMBER BODY MOUNTING FRONT STOPPER


15. REMOVE FRONT SUSPENSION MEMBER BODY MOUNTING REAR STOPPER


16. REMOVE FRONT SUSPENSION MEMBER BODY MOUNTING FRONT CUSHION


    C169231E01
  1. Install SST as shown in the illustration.

    SST
    09830-10010   (09830-01010, 09830-01040, 09830-01050)
    09950-40011   (09951-04020, 09952-04010, 09955-04011)



    C167146E01
  1. Using SST, remove the front suspension member body mounting front cushion.

    NOTICE:
    1. Make sure that the claws of SST are securely attached to the mounting cushion.
    2. Tighten SST slowly and evenly.
    3. Be careful as the mounting cushion may fly out.
    4. The mounting cushion cannot be reused.



17. REMOVE FRONT SUSPENSION MEMBER BODY MOUNTING REAR CUSHION LH


    C167149E01
  1. Using SST, remove the front suspension member body mounting rear cushion LH.

    SST
    09830-10010   (09830-01010, 09830-01040, 09830-01050)
    09950-40011   (09951-04020, 09952-04010, 09954-04010, 09955-04011)

    NOTICE:
    1. Make sure that the claws of SST are securely attached to the mounting cushion.
    2. Tighten SST slowly and evenly.
    3. Be careful as the mounting cushion may fly out.
    4. The mounting cushion cannot be reused.



18. REMOVE FRONT SUSPENSION MEMBER BODY MOUNTING REAR CUSHION RH

HINT:
Perform the same procedure as the LH side.

SST
09830-10010   (09830-01010, 09830-01040, 09830-01050)
09950-40011   (09951-04020, 09952-04010, 09954-04010, 09955-04011)