Home › HYBRID SYSTEM ยท P310 › HYBRID VEHICLE CONTROL › HYBRID CONTROL SYSTEM

DTC    P0336-137    Crankshaft Position Sensor "A" Circuit Range / Performance

for Preparation Click here


DESCRIPTION

  1. The crankshaft position sensor sends the engine speed signal (NE) to the engine CPU and HV CPU of the hybrid vehicle control ECU. The hybrid vehicle control ECU compares the input engine speed signals (NE) in the engine CPU and HV CPU. If any abnormality is found, this DTC will be stored.

DTC No.
INF Code
DTC Detection Condition
Trouble Area
P0336
137
Conditions 1 and 2 continue for 1.5 seconds (1 trip detection logic):
1. Engine speed exceeds idling speed
2. Difference between the engine speed calculated by the engine CPU and HV CPU is 300 rpm or more
Hybrid vehicle control ECU

A174220E03


WIRING DIAGRAM


A174221E04


INSPECTION PROCEDURE

1.REPLACE HYBRID VEHICLE CONTROL ECU
  1. Replace the hybrid vehicle control ECU (Click here).


NEXT

COMPLETED