Home › HYBRID SYSTEM ยท P310 › HYBRID VEHICLE CONTROL › HYBRID CONTROL SYSTEM

DTC    U0100-211    Lost Communication with ECM / PCM "A"

DTC    P0A1D-615    Hybrid Powertrain Control Module

DTC    U0100-212    Lost Communication with ECM / PCM "A"

DTC    U0100-530    Lost Communication with ECM / PCM "A"

DTC    U0100-774    Lost Communication with ECM / PCM "A"

DTC    U0100-784    Lost Communication with ECM / PCM "A"

DTC    U0129-220    Lost Communication with Brake System Control Module

DTC    U0129-222    Lost Communication with Brake System Control Module

DTC    U0129-528    Lost Communication with Brake System Control Module

DTC    U0129-529    Lost Communication with Brake System Control Module

DTC    U0140-146    Lost Communication with Body Control Module

DTC    U0164-827    Lost Communication with A/C ECU

for Preparation Click here


DESCRIPTION

  1. The HV CPU transmits and receives signals via CAN communication with the engine CPU. The HV CPU and engine CPU also transmit and receive signals via CAN communication with the skid control ECU, main body ECU, and air conditioning amplifier assembly.

A184444E02


DTC No.
INF Code
DTC Detection Condition
Trouble Area
U0100
211
Problem with CAN communication between ECM and hybrid vehicle control ECU (no signal reception, internal CAN)
Hybrid vehicle control ECU
212
Problem with CAN communication between ECM and hybrid vehicle control ECU (signal transmission error, internal CAN)
530
Problem with CAN communication between ECM and hybrid vehicle control ECU (CAN communication system malfunction, internal CAN)
774
Problem with CAN communication between ECM and hybrid vehicle control ECU (signal transmission error, external CAN)
CAN communication system
784
Problem with CAN communication between ECM and hybrid vehicle control ECU (CAN communication system malfunction, external CAN)
U0129
220
Problem with CAN communication between skid control ECU and hybrid vehicle control ECU (no signal reception)
222
Problem with CAN communication between skid control ECU and hybrid vehicle control ECU (CAN communication system malfunction)
528
Problem with CAN communication between skid control ECU and hybrid vehicle control ECU (signal transmission error)
529
Problem with CAN communication between skid control ECU and hybrid vehicle control ECU (regenerative torque malfunction)
U0140
146
Problem with CAN communication between main body ECU and hybrid vehicle control ECU (CAN communication system malfunction)
U0164
827
Problem with CAN communication between air conditioning amplifier assembly and hybrid vehicle control ECU (CAN communication system malfunction)
P0A1D
615
CAN communication problem of hybrid vehicle control ECU (signal transmission error)

MONITOR DESCRIPTION

If the hybrid vehicle control ECU detects a problem with CAN communication with the ECM, it will illuminate the MIL and set a DTC.

MONITOR STRATEGY


Related DTCs
U0100 (INF 211): Receiving check for the specific frame (CAN2)
U0100 (INF 212): Sending data check (CAN2)
U0100 (INF 530): Receiving check for the one of frame (CAN2)
U0100 (INF 774): Receiving check for the specific frame (CAN1)
U0100 (INF 784): Sending data check (CAN1)
P0A1D (INF 615): CAN communication malfunction
Required sensors / components
Main: Hybrid vehicle control ECU
Sub: CAN bus line
Frequency of operation
Continuous
Duration
TMC's intellectual property
MIL operation
1 driving cycle
Sequence of operation
None

TYPICAL ENABLING CONDITIONS


The monitor will run whenever the DTCs listed are not present
TMC's intellectual property
Other conditions belong to TMC's intellectual property
-

TYPICAL MALFUNCTION THRESHOLDS


TMC's intellectual property
-

COMPONENT OPERATING RANGE


Hybrid vehicle control ECU
DTC U0100 (INF 211/212/530/774/784), P0A1D (615) is not detected

INSPECTION PROCEDURE

1.CHECK DTC OUTPUT (ALL)
  1. Connect the Techstream to the DLC3.

  1. Turn the power switch on (IG).

  1. Check for DTCs of all systems by following the prompts on the tester screen.

  1. Check if DTCs are output.

    Result:
    Output DTC
    Proceed to
    U0100-211, U0100-212, or U0100-530 only is output.
    A
    DTCs other than above are output.
    B



B
GO TO CAN COMMUNICATION SYSTEM (Click here)
A

REPLACE HYBRID VEHICLE CONTROL ECU (Click here)