Wear protective gloves. Sharp areas on the parts may injure your hands.
71511S
1.INSTALL OCCUPANT DETECTION SENSOR (SEPARATE TYPE FRONT SEAT CUSHION PAD) (for Manual Seat)
Using hog ring pliers, install the occupant detection sensor (separate type front seat cushion pad) to the separate type front seat cushion cover with 18 new hog rings.
Be careful not to damage the separate type front seat cushion cover.
Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seat cushion cover.
Using hog ring pliers, install 2 new hog rings.
Be careful not to damage the separate type front seat cushion cover.
Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seat cushion cover.
2.INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD (for Manual Seat)
3.INSTALL SEPARATE TYPE FRONT SEATBACK ASSEMBLY (for Manual Seat)
Use the same procedure as for the driver seat.
Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Manual Seat)>REASSEMBLY
73230
4.INSTALL FRONT SEAT INNER BELT ASSEMBLY (for Manual Seat)
71861
5.INSTALL FRONT SEAT INNER CUSHION SHIELD (for Manual Seat)
71811D
6.INSTALL FRONT SEAT CUSHION SHIELD (for Manual Seat)
72526
7.INSTALL RECLINING ADJUSTER RELEASE HANDLE (for Manual Seat)
Use the same procedure as for the driver seat.
Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Manual Seat)>REASSEMBLY
71074S
8.CONNECT SEPARATE TYPE FRONT SEATBACK COVER (for Manual Seat)
Use the same procedure as for the driver seat.
Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Manual Seat)>REASSEMBLY
9.INSTALL FRONT SEAT ASSEMBLY (for Manual Seat)
Use the same procedure as for the driver seat.
Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Manual Seat)>INSTALLATION
71511S
10.INSTALL OCCUPANT DETECTION SENSOR (SEPARATE TYPE FRONT SEAT CUSHION PAD) (for Power Seat)
Using hog ring pliers, install the occupant detection sensor (separate type front seat cushion pad) to the separate type front seat cushion cover with 18 new hog rings.
Be careful not to damage the separate type front seat cushion cover.
Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seat cushion cover.
Using hog ring pliers, install 5 new hog rings.
Be careful not to damage the separate type front seat cushion cover.
Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seat cushion cover.
11.INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD (for Power Seat)
12.INSTALL SEPARATE TYPE FRONT SEATBACK ASSEMBLY (for Power Seat)
Use the same procedure as for the driver seat.
Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Power Seat)>REASSEMBLY
71868A
13.INSTALL FRONT SEAT INNER NO. 1 CUSHION SHIELD (for Power Seat)
Use the same procedure as for the driver seat.
Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Power Seat)>REASSEMBLY
71811D
14.INSTALL FRONT SEAT CUSHION SHIELD (for Power Seat)
71861
15.INSTALL FRONT SEAT INNER CUSHION SHIELD (for Power Seat)
71074S
16.CONNECT SEPARATE TYPE FRONT SEATBACK COVER (for Power Seat)
w/o Climate Control Seat System:
Use the same procedure as for the driver seat.
Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Power Seat)>REASSEMBLY
71074S
17.CONNECT SEPARATE TYPE FRONT SEATBACK COVER (for Power Seat)
w/ Climate Control Seat System:
Use the same procedure as for the driver seat.
Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Power Seat)>REASSEMBLY
73230
18.INSTALL FRONT SEAT INNER BELT ASSEMBLY (for Power Seat)
19.INSTALL FRONT SEAT ASSEMBLY (for Power Seat)
Use the same procedure as for the driver seat.
Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Power Seat)>INSTALLATION