Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › AIRBAG SYSTEM
RM3160E _58 Vehicle Interior _019710 SUPPLEMENTAL RESTRAINT SYSTEMS _0100809 AIRBAG SYSTEM D

SUPPLEMENTAL RESTRAINT SYSTEMS  AIRBAG SYSTEM  DIAGNOSIS SYSTEM  



FUNCTION OF SRS WARNING LIGHT


a.

Primary check

i.

Turn the ignition switch off. Wait for at least 2 seconds, then turn the ignition switch to ON. The SRS warning light comes on for approximately 6 seconds and diagnosis of the airbag system (including the seat belt pretensioners) is performed.

HINT:

If malfunctions are detected during the primary check, the SRS warning light remains on even after the primary check period of approximately 6 seconds.




b.

Constant check

i.

After the primary check, the airbag sensor assembly constantly monitors the airbag system for malfunctions.

HINT:
If malfunctions are detected during the constant check, the airbag sensor assembly will indicate the malfunction as follows:
·

The SRS warning light comes on.

·

The SRS warning light goes off, and then comes on. This indicates a source voltage drop. The SRS warning light goes off 10 seconds after the source voltage returns to normal.





c.

Review

i.

When the airbag system is normal:

The SRS warning light comes on only during the primary check period of approximately 6 seconds after the ignition switch is turned to ON.


ii.

When the airbag system is malfunctioning:

·

The SRS warning light remains on even after the primary check period.

·

The SRS warning light goes off after the primary check, but comes on again during the constant check.

·

The SRS warning light does not come on when the ignition switch is turned from off to ON.


HINT:

The airbag sensor assembly keeps the SRS warning light on if airbags have been deployed.





SRS WARNING LIGHT CHECK


a.
C265591

Turn the ignition switch to ON, and check that the SRS warning light comes on for approximately 6 seconds (primary check).


b.

Check that the SRS warning light goes off approximately 6 seconds after the ignition switch is turned to ON (constant check).

HINT:

When any of the following symptoms occur, refer to Problem Symptoms Table.

Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM>PROBLEM SYMPTOMS TABLE

·

The SRS warning light comes on occasionally after the primary check period.

·

The SRS warning light comes on, but DTCs are not output.

·

The ignition switch is turned from off to ON, but the SRS warning light does not come on.





FUNCTION OF PASSENGER AIRBAG ON/OFF INDICATOR (w/ Airbag Cut Off Switch)


a.

Initial check

i.

Turn the ignition switch to ON.


ii.

The passenger airbag ON/OFF indicator comes on for approximately 4 seconds, then goes off for approximately 2 seconds.

C284690E09
0.333,0.427 1.635,1 1.302,0.573 10 false Ignition Switch 1.667,0.24 2.74,0.833 1.073,0.594 10 false ON 1.667,0.656 2.76,1.094 1.094,0.438 10 false OFF 1.667,1.344 2.917,1.75 1.25,0.406 10 false ON 1.667,1.708 2.74,2.167 1.073,0.458 10 false OFF 1.667,2.344 2.76,2.75 1.094,0.406 10 false ON 1.667,2.708 2.5,3.229 0.833,0.521 10 false OFF 0.333,1.323 1.469,2.333 1.135,1.01 10 false Passenger Airbag ON/OFF Indicator ("ON") 0.333,2.333 1.469,3.333 1.135,1 10 false Passenger Airbag ON/OFF Indicator ("OFF") 3.25,1 4.521,2.667 1.271,1.667 10 false 4 sec. 3.25,2 4.583,2.667 1.333,0.667 10 false 4 sec. 4.167,1 5.5,1.417 1.333,0.417 10 false 2 sec. 4.167,2 5.5,2.417 1.333,0.417 10 false 2 sec. 4.604,3.083 6.781,3.615 2.177,0.531 10 false ON/OFF condition depends on the airbag cut off switch status results.


iii.

Approximately 6 seconds after the ignition switch is turned to ON, the passenger airbag ON/OFF indicator will indicate ON/OFF depending on the conditions listed below.

Indicator Operation
Airbag Cut Off Switch Cylinder Sub-assembly Passenger Airbag ON/OFF Indicator SRS Warning Light
ON Indicator OFF Indicator
ON ON OFF OFF
OFF OFF ON OFF
Switch failure OFF ON ON

HINT:

If the passenger airbag ON/OFF indicator does not operate as specified in the table according to the airbag cut off switch cylinder sub-assembly status, and the SRS warning light is off, no DTC will be output. Therefore, perform troubleshooting for Trouble in Passenger Airbag ON/OFF Indicator.

Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM>Trouble in Passenger Airbag ON/OFF Indicator





PASSENGER AIRBAG ON/OFF INDICATOR CHECK (w/ Airbag Cut Off Switch)


a.
C290345

Turn the ignition switch to ON.


b.

Check that the passenger airbag ON/OFF indicator ("ON" and "OFF") comes on for approximately 4 seconds, then goes off for approximately 2 seconds.

HINT:

Refer to the indicator operation table in the preceding step regarding the passenger airbag ON/OFF indicator when the ignition switch is turned to ON and approximately 6 seconds elapse.




FUNCTION OF SRS CONNECTORS


a.

The SRS connectors are located as shown in the illustration.

C290335E01
0.51,2.573 3.438,3.094 2.927,0.521 10 false Airbag Cut Off Switch Cylinder Sub-assembly* 4.979,0.25 6.563,0.583 1.583,0.333 10 false Airbag Sensor Assembly 4.698,0.583 5.281,1.073 0.583,0.49 10 false 3 4.698,0.885 5.281,1.375 0.583,0.49 10 false 4 5.625,0.583 6.208,1.073 0.583,0.49 10 false 1 5.625,0.896 6.208,1.385 0.583,0.49 10 false 2 5.615,0.74 6.198,1.229 0.583,0.49 10 false A 6.573,0.583 7.01,1.052 0.438,0.469 10 false 3 6.573,0.896 7.01,1.365 0.438,0.469 10 false 4 0.844,1.417 3.188,1.865 2.344,0.448 10 false Driver Side Junction Block Assembly 0.229,1.99 3.646,2.354 3.417,0.365 10 false Passenger Airbag ON/OFF Indicator (Clock Assembly)* 3.729,1.271 4.188,1.698 0.458,0.427 10 false 23 4,1.604 4.458,2.031 0.458,0.427 10 false 24 3.74,1.833 4.198,2.26 0.458,0.427 10 false 27 0.26,5.99 1.76,6.448 1.5,0.458 10 false Horn Button Assembly 1.875,5.833 2.438,6.094 0.563,0.26 10 false 7 2.125,6.156 2.688,6.417 0.563,0.26 10 false 8 3.115,6 4.917,6.417 1.802,0.417 10 false Spiral Cable Sub-assembly 5.271,5.833 5.833,6.094 0.563,0.26 10 false 5 5.521,6.167 6.083,6.427 0.563,0.26 10 false 6 0.573,5.427 3.469,5.719 2.896,0.292 10 false Instrument Panel Passenger Airbag Assembly 3.719,5.25 4.281,5.51 0.563,0.26 10 false 11 3.99,5.594 4.552,5.854 0.563,0.26 10 false 12 4.458,5.396 5.021,5.656 0.563,0.26 10 false 9 4.781,5.396 5.344,5.656 0.563,0.26 10 false 10 0.5,4.854 3.469,5.146 2.969,0.292 10 false Lower No. 1 Instrument Panel Airbag Assembly 3.719,4.688 4.281,4.948 0.563,0.26 10 false 13 3.99,5.021 4.552,5.281 0.563,0.26 10 false 14 1.125,4.271 2.719,4.583 1.594,0.313 10 false Front Airbag Sensor RH 3.729,4.125 4.365,4.469 0.635,0.344 10 false 17 3.99,4.448 4.625,4.792 0.635,0.344 10 false 18 4.385,4.25 5.021,4.594 0.635,0.344 10 false 15 4.781,4.25 5.417,4.594 0.635,0.344 10 false 16 1.104,3.708 2.698,4.021 1.594,0.313 10 false Front Airbag Sensor LH 3.719,3.563 4.354,3.906 0.635,0.344 10 false 17 3.99,3.875 4.625,4.219 0.635,0.344 10 false 18 4.385,3.677 5.021,4.021 0.635,0.344 10 false 15 4.781,3.677 5.417,4.021 0.635,0.344 10 false 16 0.406,3.146 3.615,3.427 3.208,0.281 10 false SRS Warning Light (Combination Meter Assembly) 3.729,2.969 4.365,3.313 0.635,0.344 10 false 19 4,3.313 4.635,3.656 0.635,0.344 10 false 20 3.729,2.396 4.365,2.74 0.635,0.344 10 false 21 4,2.74 4.635,3.083 0.635,0.344 10 false 22 4.385,1.969 4.844,2.396 0.458,0.427 10 false 25 4.792,1.969 5.25,2.396 0.458,0.427 10 false 26 4,2.156 4.458,2.583 0.458,0.427 10 false 28 0.104,6.49 2.083,6.771 1.979,0.281 10 false *: w/ Airbag Cut Off Switch

C295792E01
4.875,0.427 6.615,0.771 1.74,0.344 10 false Airbag Sensor Assembly 4.635,0.771 5.063,1.052 0.427,0.281 10 false 3 4.635,1.073 5.063,1.354 0.427,0.281 10 false 4 6.49,0.771 6.917,1.052 0.427,0.281 10 false 3 6.49,1.073 6.917,1.354 0.427,0.281 10 false 4 5.563,0.771 5.99,1.052 0.427,0.281 10 false 1 5.563,1.073 5.99,1.354 0.427,0.281 10 false 2 5.552,0.927 5.979,1.208 0.427,0.281 10 false A 0.854,2.208 2.375,2.49 1.521,0.281 10 false Rear Airbag Sensor LH 0.667,2.875 2.625,3.177 1.958,0.302 10 false Seat Position Airbag Sensor* 0.51,3.354 2.667,3.781 2.156,0.427 10 false Seat Belt Buckle Switch LH (Front Seat Inner Belt Assembly LH)* 0.625,4.354 2.688,4.615 2.063,0.26 10 false Front Seat Airbag Assembly LH 0.531,5.021 2.76,5.281 2.229,0.26 10 false Curtain Shield Airbag Assembly LH 0.542,5.677 2.781,5.979 2.24,0.302 10 false Front Seat Outer Belt Assembly LH 0.135,6.375 1.042,6.594 0.906,0.219 10 false *: for LHD 3.052,1.375 3.354,1.625 0.302,0.25 10 false 29 3.323,1.76 3.625,2.01 0.302,0.25 10 false 30 3.042,2.042 3.344,2.292 0.302,0.25 10 false 31 3.313,2.385 3.615,2.635 0.302,0.25 10 false 32 3.042,2.708 3.344,2.958 0.302,0.25 10 false 43 3.042,4.188 3.344,4.438 0.302,0.25 10 false 33 3.313,4.521 3.615,4.771 0.302,0.25 10 false 34 3.042,4.854 3.344,5.104 0.302,0.25 10 false 35 3.313,5.188 3.615,5.438 0.302,0.25 10 false 36 3.042,5.521 3.344,5.771 0.302,0.25 10 false 37 3.313,5.854 3.615,6.104 0.302,0.25 10 false 38 3.656,2.833 3.958,3.083 0.302,0.25 10 false 41 4.042,2.896 4.344,3.146 0.302,0.25 10 false 42 3.313,3.042 3.615,3.292 0.302,0.25 10 false 44 0.552,1.552 2.677,1.833 2.125,0.281 10 false Side Airbag Sensor Assembly LH

C295793E01
0.76,0.531 2.396,0.823 1.635,0.292 10 false Airbag Sensor Assembly 0.573,0.854 1.094,1.198 0.521,0.344 10 false 3 0.573,1.167 1.094,1.51 0.521,0.344 10 false 4 2.448,0.854 2.969,1.198 0.521,0.344 10 false 3 2.448,1.167 2.969,1.51 0.521,0.344 10 false 4 1.51,0.854 2.031,1.198 0.521,0.344 10 false 1 1.51,1.167 2.031,1.51 0.521,0.344 10 false 2 1.5,1.01 2.021,1.354 0.521,0.344 10 false A 4.813,2.219 6.406,2.479 1.594,0.26 10 false Rear Airbag Sensor RH 4.563,1.625 6.688,1.906 2.125,0.281 10 false Side Airbag Sensor Assembly RH 4.594,4.208 6.615,4.531 2.021,0.323 10 false Front Seat Airbag Assembly RH 4.51,4.802 6.771,5.104 2.26,0.302 10 false Curtain Shield Airbag Assembly RH 4.49,5.406 6.792,5.708 2.302,0.302 10 false Front Seat Outer Belt Assembly RH 4.698,2.813 6.698,3.115 2,0.302 10 false Seat Position Airbag Sensor*1 4.51,3.292 6.656,3.865 2.146,0.573 10 false Seat Belt Buckle Switch RH (Front Seat Inner Belt Assembly RH) 4.417,5.979 6.896,6.26 2.479,0.281 10 false Front Seat Airbag Sub-assembly RH*2 0.167,6.177 1.396,6.448 1.229,0.271 10 false *1: for RHD 0.167,6.469 2.906,6.698 2.74,0.229 10 false *2: w/ SRS Seat Cushion Airbag Assembly 3.969,1.469 4.625,1.906 0.656,0.438 10 false 29 3.708,1.833 4.365,2.271 0.656,0.438 10 false 30 3.969,2.052 4.625,2.49 0.656,0.438 10 false 31 3.708,2.396 4.365,2.833 0.656,0.438 10 false 32 3.969,4.042 4.625,4.479 0.656,0.438 10 false 33 3.698,4.385 4.354,4.823 0.656,0.438 10 false 34 3.969,4.635 4.625,5.073 0.656,0.438 10 false 35 3.698,4.979 4.354,5.417 0.656,0.438 10 false 36 3.969,5.229 4.625,5.667 0.656,0.438 10 false 37 3.698,5.573 4.354,6.01 0.656,0.438 10 false 38 3.969,5.823 4.625,6.26 0.656,0.438 10 false 39 3.698,6.156 4.354,6.594 0.656,0.438 10 false 40 3.344,2.781 4,3.219 0.656,0.438 10 false 41 2.969,2.823 3.625,3.26 0.656,0.438 10 false 42 3.958,2.646 4.615,3.083 0.656,0.438 10 false 43 3.708,2.979 4.365,3.417 0.656,0.438 10 false 44

Connector Type Application
Terminal Twin-lock Mechanism Connectors 2, 4, 6, 9, 10, 16, 20, 22, 25, 26, 28, 44
Half Connection Prevention Mechanism Connectors 6, 10, 40
Activation Prevention Mechanism Connectors 2, 4, 5, 7, 9, 11, 13, 33, 35, 37, 39
Connector Lock Mechanism (1) Connectors 8, 12, 14, 36, 38
Connector Position Assurance Mechanism Connectors 15, 18, 30, 32, 34
Connector Lock Mechanism (2) Connector A
Improper Connection Prevention Lock Mechanism Connector A


b.

Terminal twin-lock mechanism

C190972E05
2.438,0.094 2.052,0.094 false 2.813,0.656 2.438,0.094 false 5.708,0.094 5.573,0.094 false 5.854,0.635 5.708,0.094 false 0.729,0.01 2.083,0.188 1.354,0.177 10 Lance (Primary Lock) 1.229,1.448 2.167,1.625 0.938,0.177 10 Primary Lock 4.021,0.01 5.698,0.188 1.677,0.177 10 Spacer (Secondary Lock) 4.896,1.427 5.948,1.604 1.052,0.177 10 Secondary Lock

i.

This mechanism is designed to increase the ability of the terminal to remain connected and prevent it from accidentally being disconnected.


ii.

The connector has a two-piece construction consisting of the housing and spacer to securely lock the terminal using both the lance (primary lock) and spacer (secondary lock).



c.

Half connection prevention mechanism

C147461E14
1.427,1.083 1.271,1.083 false 1.531,1.417 1.427,1.083 false 1.719,0.813 1.5,0.813 false 1.833,1.375 1.719,0.813 false 2.146,0.531 1.938,0.531 false 2.354,1.333 2.146,0.531 false 3.219,0.563 3.406,0.563 false 3.01,1.208 3.219,0.563 false 3.458,0.865 3.635,0.865 false 3.198,1.313 3.458,0.865 false 5.917,0.74 5.729,0.74 false 6.063,1.156 5.917,0.74 false 1.125,0.458 1.958,0.667 0.833,0.208 10 Locking Arm 0.979,0.729 1.531,0.927 0.552,0.198 10 Stopper 0.469,1 1.323,1.25 0.854,0.25 10 Locking Part 3.448,0.5 3.885,0.688 0.438,0.188 10 Slider 3.667,0.802 4.135,0.99 0.469,0.188 10 Spring 5.177,0.646 5.76,0.833 0.583,0.188 10 Stopper 4.615,1.969 6.01,2.344 1.396,0.375 10 Rebounded by Slider

i.

This mechanism is designed to prevent the connector from being connected only halfway.


ii.

If the connector is not completely connected, the connector is disconnected due to the spring force so that no continuity exists.



d.

Activation prevention mechanism

C238382E02
1.583,1.063 1.198,0.917 false 5.26,1.521 5.26,2.042 false 1.844,1.667 1.844,2.083 false 1.656,1.448 1.198,1.448 false 2.646,1.646 2.969,1.646 false 2.354,1.385 3,0.969 3,0.969 2.552,1.458 false 1.771,0.375 2.51,0.708 0.74,0.333 10 When open 0.313,0.833 1.208,1.146 0.896,0.313 10 Male Housing 3.042,0.885 4.115,1.229 1.073,0.344 10 Female Terminal 0.302,1.375 1.198,1.698 0.896,0.323 10 Male Terminal 3.01,1.573 4.073,1.938 1.063,0.365 10 Female Housing 1.26,2.104 2.448,2.448 1.188,0.344 10 Short Spring Plate 5.448,0.375 6.354,0.75 0.906,0.375 10 When shorted 4.375,2.063 6.156,2.635 1.781,0.573 10 Short spring plate contacting the male terminal

i.

This mechanism is designed to create a short circuit automatically between the positive and negative terminals of an airbag power source connector when disconnected.


ii.

The short spring plate contained in the connector creates a closed circuit on the airbag side (no potential difference can occur between both terminals), preventing accidental airbag deployment when servicing.



e.

Connector lock mechanism (1)

C147462E03
2.521,0.344 2.021,0.198 false 2.635,0.76 2.281,0.885 false 2.469,1.24 2.271,1.323 false 4.927,0.896 5.24,0.688 false 0.531,0.115 2.01,0.292 1.479,0.177 10 Lock the locking button 1.927,0.813 2.302,0.979 0.375,0.167 10 Claw 1.792,1.25 2.281,1.417 0.49,0.167 10 Groove 5.281,0.604 6.927,1.031 1.646,0.427 10 Claw on the locking button is locked in the groove

i.

This mechanism is designed to prevent the connector from accidentally being disconnected.


ii.

Locking the connector locking button engages the locking button claws in the grooves on the other side of the connector to connect the connector securely.



f.

Connector Position Assurance (CPA) mechanism

C161464E04
0.854,0.198 1.021,0.198 false 0.833,1.104 0.854,0.198 false 1.052,0.479 1.219,0.479 false 0.927,1.25 1.052,0.479 false 0.729,2.292 0.958,2.292 false 0.51,1.792 0.729,2.292 false 5.635,0.781 5.469,0.781 false 5.646,1.156 5.635,0.781 false 1.063,0.125 2.271,0.354 1.208,0.229 10 Female Connector 1.26,0.406 2.094,0.656 0.833,0.25 10 Locking Part 1.0,2.219 2.042,2.469 1.042,0.25 10 Male Connector 2.958,0.302 4.542,0.573 1.583,0.271 10 Primary Lock Completed 5.073,0.302 6.844,0.573 1.771,0.271 10 Secondary Lock Completed 4.896,0.698 5.521,0.875 0.625,0.177 10 Retainer

i.

This mechanism is designed to detect when the connector is connected only halfway.


ii.

The CPA and female connector slide to the male connector side at the same time and the primary lock is completed when the female connector is engaged with the male connector. From this point, only the CPA slides to the male connector side and secondary lock is completed when the CPA retainer is engaged with the female connector. When the CPA and female connector ends are aligned, they are completely engaged.



g.

Connector lock mechanism (2)

C204951E05
1.135,1.385 1.135,1.813 1.135,1.813 0.854,1.813 false 1.792,3.198 1.792,3.583 1.792,3.583 2.302,3.583 false 4.156,2.76 4.156,3.063 4.156,3.063 3.896,3.063 false 6.115,3.344 5.75,3.344 false 6.458,2.75 6.583,2.75 false 6.323,2.729 6.094,2.729 false 4.385,1.448 4.646,1.448 false 0.458,1.74 0.896,2.115 0.438,0.375 10 Lance 4.688,1.375 5.208,1.677 0.521,0.302 10 Holder 2.323,3.521 2.885,3.771 0.563,0.25 10 Retainer 5.208,3.25 5.854,3.51 0.646,0.26 10 Retainer 3.344,2.979 3.948,3.323 0.604,0.344 10 Retainer 5.667,2.656 6.146,2.969 0.479,0.313 10 Holder 6.625,2.667 7.031,2.917 0.406,0.25 10 Claw

i.

This mechanism is designed to prevent the connector from accidentally being disconnected.


ii.

Sliding the connector all the way into the holder and locking the lance complete the primary lock.


iii.

Engaging the retainer to the holder as shown in the illustration completes the secondary lock, preventing the connector from accidentally being disconnected.



h.

Improper connection prevention lock mechanism

C204952E09
5.292,0.792 5.292,0.219 5.292,0.219 5.656,0.219 false 5.292,1.167 5.292,1.875 5.292,1.875 4.604,1.875 false 4.958,3.01 4.583,3.01 false 1.104,1.479 1.104,2.396 1.104,2.396 0.948,2.396 false 1.021,1.188 1.021,0.521 1.021,0.521 1.333,0.521 false 6,0.719 6,1.031 6,1.031 5.51,1.031 false 3.958,0.073 4.573,0.448 0.615,0.375 10 Top View 0.25,2.323 0.958,2.74 0.708,0.417 10 Unlock Rib 3.917,1.781 4.604,2.333 0.688,0.552 10 Temporary Hold Lock 4.219,2.927 4.625,3.24 0.406,0.313 10 Lever 5.698,0.146 6.448,0.438 0.75,0.292 10 Unlock Rib 1.375,0.448 1.594,0.698 0.219,0.25 10 A 5.958,0.563 6.219,0.802 0.26,0.24 10 A

i.

This mechanism is designed to prevent the connector from being connected only halfway.


ii.

When the holder is connected to the airbag sensor assembly, the unlock rib unlocks the temporary hold lock, allowing the lever to be pushed in by rotating around axis A.


iii.

Locking the lever to the holder locks the holder securely.




ACTIVATION PREVENTION MECHANISM


a.

Function of activation prevention mechanism

i.

An activation prevention mechanism is built into the connector of the airbag system squib circuit to prevent accidental airbag activation.


ii.

This mechanism closes the circuit when the connector is disconnected by bringing the short spring into contact with the terminals and insulating the circuit from external power sources to prevent accidental airbag activation.



b.

Releasing of activation prevention mechanism

i.

To release the activation prevention mechanism, insert a piece of paper with the same thickness as the male terminal (approximately 0.5 mm (0.0197 in.)) between the terminals and short spring to break the connection.


ii.

Refer to the following illustrations concerning connectors utilizing the activation prevention mechanism and its release method.

CAUTION:

Never release the activation prevention mechanism on the squib connector even when inspecting with the squib disconnected.


NOTICE:
·

Do not release the activation prevention mechanism unless specifically directed by the troubleshooting procedure.

·

To prevent the terminal and short spring from being damaged, always use a piece of paper with the same thickness as the male terminal.



C247452E05
1.75,0.469 2.125,0.719 0.375,0.25 3.417,0.469 3.75,0.719 0.333,0.25 5.083,0.469 5.417,0.719 0.333,0.25 0.156,5.01 0.49,5.229 0.333,0.219 0.677,6.271 1.01,6.49 0.333,0.219 3.094,2.823 3.469,2.302 3.469,2.302 3.063,2.51 false 2.479,2.917 2.104,3.333 2.104,3.333 2.49,2.615 false 5.042,2.625 4.604,3.354 4.604,3.354 5.052,2.938 false 5.5,2.823 5.979,2.271 5.979,2.271 5.521,2.51 false 6.229,4.76 6.313,4.396 6.313,4.396 6.375,4.396 false 4.01,4.76 4.135,4.365 4.135,4.365 4.198,4.365 false 3.927,6.563 3.833,6.563 3.833,6.563 3.74,6.938 false 6.49,6.573 6.396,6.573 6.396,6.573 6.313,6.938 false 3.271,7.063 3.469,7.281 3.469,7.281 3.552,7.281 false 5.813,7.052 6.021,7.281 6.021,7.281 6.094,7.281 false 5.417,4.708 5.417,5.469 false 3.271,4.708 3.271,5.458 false 0.083,0.052 3.417,0.5 3.333,0.448 10 false Wire harness connector (to Airbag Sensor Assembly): 1.833,1.917 2.792,2.25 0.958,0.333 10 false Before Release 4.479,1.917 5.365,2.292 0.885,0.375 10 false After Release 3.49,2.198 3.875,2.5 0.385,0.302 10 false Paper 5.99,2.188 6.385,2.594 0.396,0.406 10 false Paper 1.719,3.333 2.49,3.677 0.771,0.344 10 false Short Spring 4.198,3.385 4.979,3.719 0.781,0.333 10 false Short Spring 2.938,4.073 3.885,4.333 0.948,0.26 10 false Before Release 2.521,6.229 3.479,6.521 0.958,0.292 10 false Before Release 5.198,4.073 6.104,4.396 0.906,0.323 10 false After Release 5.115,6.229 5.979,6.521 0.865,0.292 10 false After Release 3.969,6.5 4.396,6.771 0.427,0.271 10 false Paper 4.229,4.292 4.635,4.448 0.406,0.156 10 false Paper 6.531,6.5 6.948,6.802 0.417,0.302 10 false Paper 6.417,4.323 6.844,4.604 0.427,0.281 10 false Paper 3.604,7.198 4.375,7.542 0.771,0.344 10 false Short Spring 6.135,7.198 6.917,7.542 0.781,0.344 10 false Short Spring 0.083,3.615 2.698,4.021 2.615,0.406 10 false Spiral Cable Sub-assembly Connector: 0.083,5.865 2.594,6.25 2.51,0.385 10 false No. 2 Instrument Panel Wire Connector: 0.521,7.469 1.406,7.76 0.885,0.292 10 false : Short Spring 2.896,5.458 3.688,5.802 0.792,0.344 10 false Short Spring 5.021,5.479 5.813,5.813 0.792,0.333 10 false Short Spring 1.865,0.51 2.281,0.75 0.417,0.24 10 false L9 3.479,0.51 3.896,0.75 0.417,0.24 10 false F38 5.167,0.51 5.583,0.75 0.417,0.24 10 false M7 0.208,5.042 0.625,5.281 0.417,0.24 10 false F63 0.76,6.302 1.177,6.542 0.417,0.24 10 false Ff1