Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM(for Navigation Receiver Type)
RM3160E _56 Audio / Visual / Telematics _019701 NAVIGATION / MULTI INFO DISPLAY _0104171 NAVIGATION SYSTEM(for Navigation Receiver Type) C

NAVIGATION / MULTI INFO DISPLAY  NAVIGATION SYSTEM(for Navigation Receiver Type)  B15C3  Speaker Output Short  


DESCRIPTION

This DTC is stored when a malfunction occurs in the speakers.

DTC No. Detection Item DTC Detection Condition Trouble Area
B15C3 Speaker Output Short A short is detected in the speaker output circuit.
·

Harness or connector

·

Speaker

·

Navigation receiver assembly



WIRING DIAGRAM

E286971E02
0.583,1.115 0.896,1.313 0.313,0.198 10 false H3 0.594,1.271 1.875,1.635 1.281,0.365 10 false Front No. 1 Speaker Assembly RH 2.01,3.083 2.167,3.281 0.156,0.198 10 false 1 2.01,1.104 2.167,1.302 0.156,0.198 10 false 1 2.01,6.375 2.167,6.573 0.156,0.198 10 false 1 2.74,0.833 2.896,1.031 0.156,0.198 10 false 3 2.74,1.708 2.896,1.906 0.156,0.198 10 false 1 5.677,4.656 5.833,4.854 0.156,0.198 10 false 1 2.01,4.875 2.167,5.073 0.156,0.198 10 false 1 2.01,1.667 2.167,1.865 0.156,0.198 10 false 2 2.01,3.635 2.167,3.833 0.156,0.198 10 false 2 2.01,6.958 2.167,7.156 0.156,0.198 10 false 2 3.979,3.677 4.135,3.875 0.156,0.198 10 false 2 3.979,2.813 4.135,3.01 0.156,0.198 10 false 4 2.01,5.448 2.167,5.646 0.156,0.198 10 false 2 5.677,2.74 5.833,2.938 0.156,0.198 10 false 2 2.74,2.823 2.896,3.021 0.156,0.198 10 false 3 3.99,0.854 4.146,1.052 0.156,0.198 10 false 4 3.99,1.719 4.146,1.917 0.156,0.198 10 false 2 5.688,0.771 5.844,0.969 0.156,0.198 10 false 1 2.906,1.708 3.063,1.906 0.156,0.198 10 false - 5.677,1.635 5.833,1.833 0.156,0.198 10 false 5 3.823,3.688 4,3.927 0.177,0.24 10 false - 5.688,3.604 5.844,3.802 0.156,0.198 10 false 6 2.74,3.677 2.896,3.875 0.156,0.198 10 false 1 5.677,5.292 5.833,5.49 0.156,0.198 10 false 3 5.677,6.156 5.833,6.354 0.156,0.198 10 false 2 5.667,6.813 5.823,7.01 0.156,0.198 10 false 6 2.896,2.823 3.052,3.021 0.156,0.198 10 false + 2.885,0.844 3.042,1.042 0.156,0.198 10 false + 2.906,3.677 3.063,3.875 0.156,0.198 10 false - 3.802,0.854 3.958,1.115 0.156,0.26 10 false + 3.823,1.708 3.99,1.938 0.167,0.229 10 false - 5.563,1.823 6.063,2.094 0.5,0.271 10 false F114 5.958,4.854 6.406,5.094 0.448,0.24 10 false RR+ 3.802,2.813 3.969,3.052 0.167,0.24 10 false + 2.469,2.063 2.781,2.26 0.313,0.198 10 false G1 2.479,2.208 4.698,2.458 2.219,0.25 10 false Front No. 2 Speaker Assembly RH 2.469,4.177 4.688,4.427 2.219,0.25 10 false Front No. 2 Speaker Assembly LH 2.469,4.031 2.781,4.229 0.313,0.198 10 false G5 0.594,3.094 0.906,3.292 0.313,0.198 10 false I3 0.135,5.021 0.448,5.219 0.313,0.198 10 false J4 0.167,6.521 0.479,6.719 0.313,0.198 10 false K4 0.125,5.188 1.969,5.396 1.844,0.208 10 false Rear Speaker Assembly RH 0.594,3.25 1.844,3.667 1.25,0.417 10 false Front No. 1 Speaker Assembly LH 5.781,7.469 7,7.906 1.219,0.438 10 false Navigation Receiver Assembly 0.156,6.677 1.938,6.865 1.781,0.188 10 false Rear Speaker Assembly LH 5.563,2.917 6.094,3.198 0.531,0.281 10 false F114 5.573,3.792 6.104,4.104 0.531,0.313 10 false F114 5.958,1.813 6.292,2.01 0.333,0.198 10 false FR- 5.563,6.979 6.021,7.25 0.458,0.271 10 false F115 5.573,0.938 6.042,1.208 0.469,0.271 10 false F114 5.573,4.844 6.01,5.073 0.438,0.229 10 false F115 5.573,5.469 6.083,5.729 0.51,0.26 10 false F115 5.573,6.354 5.906,6.552 0.333,0.198 10 false F115 5.958,0.938 6.292,1.135 0.333,0.198 10 false FR+ 5.958,2.906 6.292,3.104 0.333,0.198 10 false FL+ 5.958,3.781 6.292,3.979 0.333,0.198 10 false FL- 5.958,5.479 6.406,5.719 0.448,0.24 10 false RR- 5.958,6.99 6.406,7.229 0.448,0.24 10 false RL- 5.958,6.354 6.406,6.594 0.448,0.24 10 false RL+



PROCEDURE

1.CHECK HARNESS AND CONNECTOR (NAVIGATION RECEIVER ASSEMBLY - BODY GROUND)
a.

Disconnect the F114 and F115 navigation receiver assembly connectors.


b.

Disconnect the G1 and G5 front No. 2 speaker assembly connectors.


c.

Disconnect the J4 and K4 rear speaker assembly connectors.


d.

Measure the resistance between the navigation receiver assembly and body ground to check for a short circuit in the wire harness.

Standard Resistance:
Tester Connection Condition Specified Condition
F114-1 (FR+) - Body ground Always 10 kΩ or higher
F114-5 (FR-) - Body ground Always 10 kΩ or higher
F114-2 (FL+) - Body ground Always 10 kΩ or higher
F114-6 (FL-) - Body ground Always 10 kΩ or higher
F115-1 (RR+) - Body ground Always 10 kΩ or higher
F115-3 (RR-) - Body ground Always 10 kΩ or higher
F115-2 (RL+) - Body ground Always 10 kΩ or higher
F115-6 (RL-) - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

2.CHECK HARNESS AND CONNECTOR (FRONT NO. 2 SPEAKER ASSEMBLY - BODY GROUND)

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

2.CHECK HARNESS AND CONNECTOR (FRONT NO. 2 SPEAKER ASSEMBLY - BODY GROUND)
a.

Disconnect the H3 and I3 front No. 1 speaker assembly connectors.


b.

Disconnect the G1 and G5 front No. 2 speaker assembly connectors.


c.

Measure the resistance between each of the front No. 2 speaker assemblies and body ground to check for a short circuit in the wire harness.

Standard Resistance:
Tester Connection Condition Specified Condition
G1-3 (+) - Body ground Always 10 kΩ or higher
G1-1 (-) - Body ground Always 10 kΩ or higher
G5-3 (+) - Body ground Always 10 kΩ or higher
G5-1 (-) - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

3.INSPECT FRONT NO. 1 SPEAKER ASSEMBLY

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

3.INSPECT FRONT NO. 1 SPEAKER ASSEMBLY
a.

Remove the front No. 1 speaker assembly.

Click hereAudio / Visual / Telematics>AUDIO / VIDEO>FRONT DOOR SPEAKER>REMOVAL


b.
E219303C68
0.177,0.146 0.573,0.469 0.396,0.323 10 false *a
*a Component without harness connected
(Front No. 1 Speaker Assembly)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 Always 3.2 to 4.8 Ω



Result:
Proceed to
OK
NG



OK

4.INSPECT FRONT NO. 2 SPEAKER ASSEMBLY

NG

REPLACE FRONT NO. 1 SPEAKER ASSEMBLY

4.INSPECT FRONT NO. 2 SPEAKER ASSEMBLY
a.

Remove the front No. 2 speaker assembly.

Click hereAudio / Visual / Telematics>AUDIO / VIDEO>INSTRUMENT PANEL SPEAKER>REMOVAL


b.
E226097C34
1.396,1.813 1.042,2.302 false 1.677,1.823 1.542,2.302 false 2.24,1.813 2.604,2.333 false 1.99,1.813 2.125,2.302 false 0.094,0.083 0.25,0.229 0.156,0.146 10 false *a 1.5,2.313 1.656,2.458 0.156,0.146 10 false + 0.927,2.313 1.281,2.531 0.354,0.219 10 false + 2.115,2.323 2.49,2.5 0.375,0.177 10 false - 2.646,2.313 2.76,2.458 0.115,0.146 10 false -
*a Component without harness connected
(Front No. 2 Speaker Assembly)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
4 (+) - 2 (-) Always 10 kΩ or higher
3 (+) - 4 (+) Always Below 1 Ω
1 (-) - 2 (-) Always Below 1 Ω



Result:
Proceed to
OK
NG



OK

5.REPLACE FRONT NO. 2 SPEAKER ASSEMBLY

NG

5.REPLACE FRONT NO. 2 SPEAKER ASSEMBLY
a.

Replace the front No. 2 speaker assembly with a new or known good one.

Click hereAudio / Visual / Telematics>AUDIO / VIDEO>INSTRUMENT PANEL SPEAKER>REMOVAL


b.

Clear the DTCs.

Click hereAudio / Visual / Telematics>NAVIGATION / MULTI INFO DISPLAY>NAVIGATION SYSTEM(for Navigation Receiver Type)>DTC CHECK / CLEAR

Body Electrical > Navigation System > Clear DTCs
50002 212

c.

Recheck for DTCs and check that no DTCs are output.

Body Electrical > Navigation System > Trouble Codes
50001 212
OK:

No DTCs are output.


HINT:
·

Connect all the connectors to the front No. 2 speaker assemblies that were disconnected.

·

When there is a possibility that either the right or left front No. 2 speaker assembly is defective, inspect by interchanging the right one with the left one.

·

Perform the above inspection on both the LH and RH side.




Result:
Proceed to
OK
NG



OK

END

NG

6.INSPECT REAR SPEAKER ASSEMBLY
6.INSPECT REAR SPEAKER ASSEMBLY
a.

Remove the rear speaker assembly.

Click hereAudio / Visual / Telematics>AUDIO / VIDEO>REAR DOOR SPEAKER>REMOVAL


b.
E219303C68
0.177,0.146 0.573,0.469 0.396,0.323 10 false *a
*a Component without harness connected
(Rear Speaker Assembly)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 Always 3.2 to 4.8 Ω



Result:
Proceed to
OK
NG



OK

NG