Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM(for Navigation Receiver Type)
RM3160E _56 Audio / Visual / Telematics _019701 NAVIGATION / MULTI INFO DISPLAY _0104171 NAVIGATION SYSTEM(for Navigation Receiver Type) C

NAVIGATION / MULTI INFO DISPLAY  NAVIGATION SYSTEM(for Navigation Receiver Type)  B1579  Voice Recognition Microphone Disconnected  


DESCRIPTION

The navigation receiver assembly and map light assembly (telephone microphone assembly) are connected to each other using the microphone connection detection signal lines.

This DTC is stored when a microphone connection detection signal line is disconnected.

DTC No. Detection Item DTC Detection Condition Trouble Area
B1579 Voice Recognition Microphone Disconnected Microphone signal is lost
·

Map light assembly (telephone microphone assembly)

·

Navigation receiver assembly

·

Harness or connector



WIRING DIAGRAM

E226160
1.698,0.708 2.115,0.875 0.417,0.167 10 false SNS2 1.688,1.5 2.104,1.667 0.417,0.167 10 false MCO- 0.583,1.917 0.833,2.083 0.25,0.167 10 false S1 0.583,2.083 2.563,2.458 1.979,0.375 10 false Map Light Assembly (Telephone Microphone Assembly) 4.75,1.969 5.229,2.208 0.479,0.24 10 false F116 4.75,2.115 6.688,2.458 1.938,0.344 10 false Navigation Receiver Assembly 5.083,0.698 5.5,0.865 0.417,0.167 10 false SNS2 5.083,1.5 5.417,1.667 0.333,0.167 10 false MIN- 2.146,0.604 2.458,0.792 0.313,0.188 10 false 13 2.167,1.396 2.333,1.563 0.167,0.167 10 false 4 4.906,0.604 5.073,0.771 0.167,0.167 10 false 6 4.823,1.396 5.073,1.563 0.25,0.167 10 false 19

PROCEDURE

1.INSPECT NAVIGATION RECEIVER ASSEMBLY
a.
E176671
1.479,0.542 1.969,0.833 0.49,0.292 2.094,2.01 2.604,2.677 false 1.573,0.594 2.26,0.99 0.688,0.396 10 false F116 0.208,0.146 1.073,0.75 0.865,0.604 10 false *a 2.479,2.698 3.302,3.146 0.823,0.448 10 false MIN-
*a Component with harness connected
(Navigation Receiver Assembly)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
F116-19 (MIN-) - Body ground Always Below 1 Ω



Result:
Proceed to
OK
NG



OK

2.CHECK HARNESS AND CONNECTOR (NAVIGATION RECEIVER ASSEMBLY - MAP LIGHT ASSEMBLY (TELEPHONE MICROPHONE ASSEMBLY))

NG

2.CHECK HARNESS AND CONNECTOR (NAVIGATION RECEIVER ASSEMBLY - MAP LIGHT ASSEMBLY (TELEPHONE MICROPHONE ASSEMBLY))
a.

Disconnect the F116 navigation receiver assembly connector.


b.

Disconnect the S1 map light assembly (telephone microphone assembly) connector.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
F116-6 (SNS2) - S1-13 (SNS2) Always Below 1 Ω
F116-19 (MIN-) - S1-4 (MCO-) Always Below 1 Ω
F116-6 (SNS2) - Body ground Always 10 kΩ or higher
F116-19 (MIN-) - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

3.INSPECT MAP LIGHT ASSEMBLY (TELEPHONE MICROPHONE ASSEMBLY)

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

3.INSPECT MAP LIGHT ASSEMBLY (TELEPHONE MICROPHONE ASSEMBLY)
a.

Remove the map light assembly (telephone microphone assembly).

Click hereVehicle Interior>LIGHTING (INT)>PERSONAL LIGHT>REMOVAL


b.
E286966
2.208,1.229 2.323,1.656 false 1.781,0.51 1.948,1.042 false 2.302,1.688 2.917,1.885 0.615,0.198 10 false SNS2 1.5,0.344 2.115,0.542 0.615,0.198 10 false MCO- 0.104,0.073 0.417,0.271 0.313,0.198 10 false *a
*a Component without harness connected
(Map Light Assembly (Telephone Microphone Assembly))


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
13 (SNS2) - 4 (MCO-) Always Below 1 Ω



Result:
Proceed to
OK
NG



OK

NG

REPLACE MAP LIGHT ASSEMBLY (TELEPHONE MICROPHONE ASSEMBLY)